Valid

GB/T 37796-2019Insulation refractories—Determination of thermal conductivity (calorimeter) (English PDF)

隔热耐火材料 导热系数试验方法(量热计法)

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 37796-2019 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

August 30, 2019

Implementation date

July 1, 2020

Scope

GB/T 37796-2019 is the English-translated version of 隔热耐火材料 导热系数试验方法(量热计法).

GB/T 37796-2019 is the Chinese standard "Insulation refractories—Determination of thermal conductivity (calorimeter)". Its scope clause reads: This standard specifies the principle, equipment, sample preparation, test procedure and results of the thermal conductivity test method (calorimeter method) for insulating refractories.

Calculation and test report. This standard is applicable to the determination of the thermal conductivity of refractory fibers and their products, heat-insulated shaped products and other insulating refractory materials. Its clauses include principle; instruments.

Found what you need?

Document preview — GB/T 37796-2019

National Standard of the People's Republic of China

ICS
81.080
Classification
Q 40

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Principle
  • 4 instruments

1 Scope

This standard specifies the principle, equipment, sample preparation, test procedure and results of the thermal conductivity test method (calorimeter method) for insulating refractories.

Calculation and test report.

This standard is applicable to the determination of the thermal conductivity of refractory fibers and their products, heat-insulated shaped products and other insulating refractory materials.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

Test method for bulk density and true porosity of GB/T 2998 shaped insulating refractory products

GB/T 8170 Numerical Rounding Rules and Representation and Determination of Limit Values

GB/T 16839.1 Thermocouple Part 1. Electromotive force specifications and tolerances

GB/T 17911 refractory fiber product test method

3 Principle

According to the Fourier heat conduction law, when the test sample heat transfer reaches a steady state, it is heated by the hot surface of the sample to the cold surface per unit time.

The amount of heat absorbed is proportional to the cross-sectional area of the sample perpendicular to the direction of heat propagation and the temperature gradient. This standard requires a large test

Temperature gradient and steady state conditions.

4 instruments

4.1 Electric drying oven

The temperature can be controlled at 110 °C ± 5 °C.

4.2 Balance

The division value is 0.1g.

4.3 Thermal conductivity tester

4.3.1

Thermal conductivity tester includes heating chamber, calorimeter, water circulation system, thermocouple and instrument. Schematic diagram of thermal conductivity tester see picture 1.

4.3.2 Heating chamber

See Figure 2. In a neutral or oxidizing atmosphere, the heating chamber can be heated to a certain temperature rise curve and stabilized.

1550 ° C ± 3 ° C. A piece of silicon carbide equalizing plate of not less than 342mm × 228mm × 25mm is placed above the sample, silicon carbide board

The surface of 342mm × 228mm should be flat. Under the calorimeter, a layer of insulation of at least 25 mm thickness should be provided.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 37796-2019

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 37796-2019

$145.00