GB/T 37794-2019Carbon fibre—Determination of knot strength (English PDF)
碳纤维 结节拉伸强度的测定
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 37794-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
August 30, 2019
Implementation date
July 1, 2020
Scope
GB/T 37794-2019 is the English-translated version of 碳纤维 结节拉伸强度的测定.
GB/T 37794-2019 is the Chinese standard "Carbon fibre—Determination of knot strength". Its scope clause reads: This standard specifies the method for determining the tensile strength of carbon fiber nodules.
This standard applies to polyacrylonitrile-based carbon fibers with a tow size of 24k and below. Its clauses include terms and definitions; principle; test equipment; sample.
Found what you need?
Document preview — GB/T 37794-2019
National Standard of the People's Republic of China
- ICS
- 59.100.20
- Classification
- Q 36
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Principle
- 5 test equipment
- 6 sample
1 Scope
This standard specifies the method for determining the tensile strength of carbon fiber nodules.
This standard applies to polyacrylonitrile-based carbon fibers with a tow size of 24k and below.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
Determination of tensile properties of GB/T 26749 carbon fiber dipped yarn
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Nodular tensile strength
Tensile strength after knotting.
Note. in megapascals (MPa).
4 Principle
The knotted tow is stretched to break under uniform loading by a suitable mechanical device. Tensile strength divided by breaking load divided by tow cross section
Get it.
5 test equipment
5.1 Tensile testing machine
Constant velocity elongation (CRE), the speed can be constant within the range of (20 ± 3) mm/min. The accuracy of the load reading is higher than the test
1% of the value.
5.2 Fixture
It should ensure that the center line of the sample is consistent with the central axis of the test machine. The clamping surface of the clamp should be guaranteed not to damage the sample and not in the fixture.
Slip. If the clamped specimen does not meet the requirements, use a gasket, zigzag or corrugated clamp, paper, felt, leather, plastic or rubber sheet.
Can be used as a gasket material. Pneumatic clamps are recommended.
6 sample
6.1 Shape and size
The shape and dimensions of the sample are shown in Figures 1 and 2.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 37794-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 37794-2019
$85.00