Valid

GB/T 37783-2019Metallic materials—High strain rate tensile test method at elevated temperature (English PDF)

金属材料 高应变速率高温拉伸试验方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (20 pages)

Need quotation for your management?

Get a formal quotation for GB/T 37783-2019 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

August 30, 2019

Implementation date

July 1, 2020

Scope

GB/T 37783-2019 is the English-translated version of 金属材料 高应变速率高温拉伸试验方法.

GB/T 37783-2019 is the Chinese standard "Metallic materials—High strain rate tensile test method at elevated temperature". Its scope clause reads: This standard specifies the terminology and determination of high strain rate high temperature tensile test for metal materials using a split Hopkinson test rod.

Meaning, symbol and description, test principle, test equipment, sample, test procedure, test data processing, test result validity evaluation and test report And so on.

This standard is applicable to tensile stress-strain curves of metal materials when the temperature is higher than room temperature and the strain rate ranges from 102s-1 to 103s-1.

Determination of learning performance. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 37783-2019

National Standard of the People's Republic of China

ICS
77.040.10
Classification
H 22

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 4 symbols and instructions
  • 5 Test principle
  • 6 Test equipment
  • 7 sample
  • 8 Test procedure
  • 9 Test data processing
  • 10 Test results effectiveness evaluation
  • 11 Test report
  • Appendix A (Normative) Separate Hopkinson Tie Rod
  • Appendix B (Normative) Data Testing System
  • Appendix C (informative appendix) Method for correcting temperature effects
  • Appendix D (informative) Method for determining the origin of incident, reflected and transmitted waves
  • Appendix E (informative) Separation Hopkinson tensile test method data processing formula
  • Appendix F (informative) High strain rate high temperature tensile test test example
  • Appendix G (informative) High strain rate high temperature tensile test test abnormality example

1 Scope

This standard specifies the terminology and determination of high strain rate high temperature tensile test for metal materials using a split Hopkinson test rod.

Meaning, symbol and description, test principle, test equipment, sample, test procedure, test data processing, test result validity evaluation and test report

And so on.

This standard is applicable to tensile stress-strain curves of metal materials when the temperature is higher than room temperature and the strain rate ranges from 102s-1 to 103s-1.

Determination of learning performance.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 228.2-2015 tensile testing of metallic materials - Part 2

GB/T 1804-2000 General tolerances and tolerances for linear and angular dimensions without tolerances

GB/T 2975 steel and steel products mechanical properties test sampling position and sample preparation

GB/T 10623 Metallic material mechanical properties test terminology

GB/T 13992 metal adhesive resistance strain gauge

GB/T 30069.1 tensile test of high strain rate of metallic materials - Part 1

GB/T 32967.1 Metallic materials - High strain rate torsion test - Part 1

JJG623 resistance strain gauge

3 Terms and definitions

The following terms and definitions as defined in GB/T 10623 and GB/T 32967.1 apply to this document.

3.1 Elastic tensile wave

The elastic stress wave that propagates tensile stress in the medium has a particle motion direction opposite to the wave propagation direction.

3.2 Elastic tensile wave rate

The rate at which the elastic stretch wavefront propagates.

3.3 Split Hopkinson Trolley splitHopkinsontensilebar

A device for tensile mechanical properties such as stress-strain curves at high strain rates is tested using elastic tensile waves.

3.4 Cold contact time

The difference between the time when the sample contacts the waveguide rod and the time when the stress wave reaches the interface of the sample/incident rod.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.

Similar standards

How to Download GB/T 37783-2019

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
20 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 37783-2019

$355.00