GB/T 37766-2019General specification for airborne absorbing metamaterial (English PDF)
机载吸波超材料通用规范
This is a limited preview
Buy now to download the full PDF (27 pages)
Need quotation for your management?
Get a formal quotation for GB/T 37766-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
June 4, 2019
Implementation date
January 1, 2020
Scope
GB/T 37766-2019 is the English-translated version of 机载吸波超材料通用规范.
GB/T 37766-2019 is the Chinese standard "General specification for airborne absorbing metamaterial". Its scope clause reads: This standard specifies the terms and definitions, classification, requirements, inspection rules and methods of airborne absorbing supermaterials, as well as marking, packaging, transportation and Storage.
This standard applies to the development, production, inspection and delivery of airborne absorbing supermaterials.
Found what you need?
Document preview — GB/T 37766-2019
National Standard of the People's Republic of China
- ICS
- 49.025.99
- Classification
- V 10
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Category
- 5 Requirements
- 6 Inspection rules and methods
- 7 Marking, packaging, transport and storage
- Appendix A (informative) Airborne absorbing supermaterial
- Appendix B (Normative) Cellular Requirements
- Appendix C (Normative Appendix) RCS Test Method and Bow Test Method
1 Scope
This standard specifies the terms and definitions, classification, requirements, inspection rules and methods of airborne absorbing supermaterials, as well as marking, packaging, transportation and
Storage.
This standard applies to the development, production, inspection and delivery of airborne absorbing supermaterials.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 1447-2005 Test method for tensile properties of fiber reinforced plastics
GB/T 1448-2005 Test method for compression properties of fiber reinforced plastics
GB/T 1449-2005 Test method for flexural properties of fiber reinforced plastics
GB/T 1450.1-2005 Test method for interlaminar shear strength of fiber reinforced plastics
GB/T 1452 laminated structure flat tensile strength test method
GB/T 1453 laminated structure or core flatness test method
GB/T 1454 sandwich structure lateral pressure performance test method
GB/T 1455 sandwich structure or core shear performance test method
GB/T 1456 laminated structure bending performance test method
GB/T 1457-2005 Test method for peeling strength of sandwich structure drum
GB/T 1463-2005 Test method for density and relative density of fiber reinforced plastics
GB/T 1464-2005 Sandwich structure or core density test method
GB/T 1543 Determination of opacity (paper backing) of paper and paperboard (diffuse reflection method)
GB/T 2423.24 Environmental testing - Part 2. Test methods test Sa. Simulating solar radiation on the ground and its test guidelines
GB/T 2573 glass fiber reinforced plastic aging performance test method
GB/T 2576 fiber reinforced plastic resin insoluble content test method
GB/T 2577 glass fiber reinforced plastic resin content test method
GB/T 3355 polymer matrix composite material longitudinal and transverse shear test method
GB/T 5258 fiber reinforced plastic in-plane compression performance test method
GB/T 5597 Test method for microwave dielectric constant of solid dielectric
GB/T 8237 liquid unsaturated polyester resin for fiber reinforced plastics
GB/T 9979 fiber reinforced plastics high and low temperature mechanical properties test criteria
GB/T 12123 General requirements for packaging design
GB/T 13657 Bisphenol A epoxy resin
GB/T 14207 Sandwich structure or core water absorption test method
GB/T 14522 Plastics, coatings and rubber materials for machinery industry
GB/T 32005 electromagnetic super material terminology
HB5469 Civil aircraft cabin interior non-metallic materials burning test method […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 27 pages — is available in the English PDF.
Similar standards
How to Download GB/T 37766-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 37766-2019
$475.00