GB/T 37720-2019Identification cards—Chip technical requirements for financial IC card (English PDF)

Foreword

This Standard was drafted in accordance with the rules given in GB/T 1.1-2009.

1 Scope

This Standard specifies technical requirements for financial IC card chip (wafer and single bare chip), including basic requirements, physical characteristics, electrical characteristics, communication interfaces, security and life requirements.

This Standard is applicable to the design, manufacture and use of financial IC card chip.

2 Normative references

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

GB/T 32915, Information security technology - Binary sequence randomness detection method

GB/T 35010.3-2018, Semiconductor die products - Part 3: Guide for handling, packing and storage

GM/T 0008-2012, Cryptography test criteria for security IC

JR/T 0025.3-2013, China Financial Integrated Circuit Card Specifications- Part 3: Specification on Application Independent ICC to Terminal Interface Requirements ISO/IEC 7816-3, Identification cards - Integrated circuit cards - Part 3: Electronic signals and transmission protocols ISO/IEC 14443-1:2018, Identification cards - Contactless integrated circuit cards - Proximity cards - Part1: Physical characteristics ISO/IEC 14443-2, Identification cards - Contactless integrated circuit cards - Proximity cards - Part 2: Radio frequency power and signal interface ISO/IEC 14443-3, Identification cards - Contactless integrated circuit cards - State Cryptography Administration.

3 Terms and definitions

4 Acronyms

The following acronyms apply to this document.

FIB: Focused Ion Beam IC: Integrated Circuit RMS: Root Mean Square

5 General requirements