GB/T 37708-2019Quality management—Guidelines for successful data envelopment analysis of product (English PDF)
质量管理 产品成功数据包络分析指南
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 37708-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
June 4, 2019
Implementation date
January 1, 2020
Scope
GB/T 37708-2019 is the English-translated version of 质量管理 产品成功数据包络分析指南.
GB/T 37708-2019 is a quality management guide to successful data envelopment analysis of products. Clause 1 states that the standard gives a method for successful data envelopment analysis and that it applies to organizations that undertake complex, high-input, high-cost, high-risk product development.
The introduction describes the core of the method as comparing product performance test data and key process parameters with the data range, that is the envelope, of the corresponding data of successful samples, determining whether the data under analysis fall within the envelope and assessing whether the product meets requirements, so as to find weaknesses and defects in the design and development process, identify system quality hazards and implement improvements; it notes that the products concerned are the specific products the organization provides to its customers, in fields such as aerospace, aviation, marine, energy, information and electronics, where product systems are complex with high investment and high risk, development has many stages with high performance indicators, and development and production have a major impact on the organization.
The contents list clause 4 on the principle, clause 5 on the analysis object, with subclauses for general, the objects of performance data envelopment analysis, the object of process data envelope analysis and the envelope range of data, clause 6 on the analysis method, divided into performance data envelope analysis, process data envelope analysis and data consistency analysis, and clause 7 on implementation and improvement, divided into general, planning, collection, analysis, evaluation and improvement.
Clause 2 cites GB/T 19000 alone, and clause 3 applies the terms defined in GB/T 19000 while adding its own, among them margin, out-of-tolerance, envelope, successful sample, data envelope range, data envelop analysis and critical process, with a note that successful verification in this standard means the product has been verified by sufficient laboratory or test site verification or by the customer's use verification.
The draft on the page breaks off inside the definition of critical process, so clauses 4 to 7 are not shown. The standard is proposed and managed by the National Quality Management and Quality Assurance Standardization Technical Committee (SAC/TC151). It was issued on 2019-06-04 and has applied since 2020-01-01.
Found what you need?
Document preview — GB/T 37708-2019
National Standard of the People's Republic of China
- ICS
- 03.120.10
- Classification
- A 00
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Principle
- 5 Analysis object
- 5.1 General
- 5.2 Objects of performance data envelopment analysis
- 5.3 Object of Process Data Envelope Analysis
- 5.4 Envelope range of data
- 6 Analysis method
- 6.1 Performance Data Envelope Analysis
- 6.2 Process Data Envelope Analysis
- 6.3 Data Consistency Analysis
- 7 Implementation and Improvement
- 7.1 General
- 7.2 Planning
- 7.3 Collection
- 7.4 Analysis
- 7.5 Evaluation
- 7.6 Improvement
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
Introduction
0.1 General
This standard provides organizations with a means to implement successful data envelopment analysis to help organizations address complex, costly product implementations. Various quality risks in the process.
Note 1. The products covered by this standard refer to the specific products that the organization provides to customers.
Some organizations, such as aerospace, aviation, marine, energy, information, electronics, etc., have the following characteristics.
a) The product system is complex, with high investment and high risk;
b) There are many stages in product development and development, and performance indicators are high;
c) Product development and production have a major impact on the development of the organization.
Note 2. Development refers to the design, development and trial production of products.
If the organization does not fully utilize the data collection and analysis in the product realization process, it does not identify the actual existence and affects the completion of the task.
The quality hazard will lead to frequent quality problems and even affect product delivery.
Comparing the product performance test data and key process parameters to the data range (ie envelope) of the corresponding data of the successful sample Yes, determine whether the data to be analyzed falls within the envelope, and evaluate whether the product meets the requirements to identify the risk and improve the effective response.
Sexuality, ensuring that products that meet the requirements are the core of this standard.
0.2 Purpose
Successful data envelopment analysis is a method to deal with the technical risks of complex systems. The purpose of this method is to find out the organization in product design and development. Weaknesses and defects in the process, find and solve system quality hazards, and implement improvements to reduce losses.
1 Scope
This standard gives a method for successful data envelopment analysis.
This standard applies to organizations that undertake complex, high-input, high-cost, high-risk product development.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 19000 Quality Management System Foundation and Terminology
3 Terms and definitions
The following terms and definitions defined in GB/T 19000 apply to this document.
3.1 Margin
The extent to which there is a certain margin allows for a certain error with the standard value.
3.2 Out-of-tolerance
Product performance indicators are outside the specified requirements.
3.3 Envelope
The range of data.
3.4 Successful sample
Several successful products involved in successful data envelopment analysis.
3.5 Data envelope range
The data range formed by several validated product data, the maximum and minimum values of each data as the edge of the envelope range Boundary value.
Note: The successful verification in this standard means that the product has been verified by sufficient laboratory or test site verification, or the customer's use verification. ability.
3.6 Data envelop analysis
Comparing the product data to be analyzed with the corresponding data envelope range, and determining whether the product data to be analyzed falls within the envelope range, Assess the product data envelope to be analyzed to assess whether the product has the ability to meet standards or customer requirements.
3.7 Critical process
Processes that form key characteristics and important characteristics; or that are difficult to process in production, unstable in quality, and prone to significant economic losses
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
Similar standards
How to Download GB/T 37708-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 19000.1-1994 — Quality management and quality assurance standards--Part 1: Guidelines for selection and use
GB/T 19000-1992 — Quality management and quality assurance standards--Guidelines for selection and use
GB/T 19000.2-1994 — Quality management and quality assurance standards. Generic guidelines for the application of GB/T 19001-ISO9001, GB/T 19002-ISO9002 and GB/T 19003-ISO9003
GB/T 37708-2019
$145.00