Valid

GB/T 37701-2019Corrosion resistant alloy clad or lined steel pipe for petroleum and natural gas industries (English PDF)

石油天然气工业用内覆或衬里耐腐蚀合金复合钢管

Preview PDF

This is a limited preview

Buy now to download the full PDF (34 pages)

Need quotation for your management?

Get a formal quotation for GB/T 37701-2019 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

June 4, 2019

Implementation date

January 1, 2020

Scope

GB/T 37701-2019 is the English-translated version of 石油天然气工业用内覆或衬里耐腐蚀合金复合钢管.

GB/T 37701-2019 is the Chinese standard "Corrosion resistant alloy clad or lined steel pipe for petroleum and natural gas industries".

Its scope clause reads: This standard specifies the purchaser's instructions, manufacture, and use of the inner or lining corrosion-resistant alloy composite steel pipe for the oil and gas industry pipeline transportation system.

Physical and chemical properties, test methods, inspection rules, marking, packaging, storage and protection, and documentation requirements. This standard is applicable to the corrosion-resistant alloys for fluids such as petroleum, natural gas and water containing corrosive media in the oil and gas industry. Composite steel pipe.

Found what you need?

Document preview — GB/T 37701-2019

National Standard of the People's Republic of China

ICS
75.200
Classification
E 16

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions, symbols and abbreviations
  • 3.1 Terms and Definitions
  • 3.2 Symbols and Codes
  • 3.3 Abbreviations
  • 4 Notice to the purchaser
  • 4.1 Basic information
  • 4.2 Supplementary information
  • 5 manufacturing
  • 5.1 Raw materials
  • 5.2 Manufacturing Process
  • 5.3 Heat treatment
  • 5.4 Cold sizing and cold expansion
  • 5.5 Welding
  • 5.6 pipe end cut and groove
  • 5.7 Surface treatment
  • 5.8 Manufacturing Process Assessment
  • 6 Physical and chemical properties
  • 6.1 Chemical composition of the base layer
  • 6.2 Chemical composition of the CRA layer
  • 6.3 Tensile properties
  • 6.4 Fracture toughness
  • 6.5 Guided bending performance
  • 6.6 Anti-shrinking performance
  • 6.7 Section hardness
  • 6.8 Weld macro and micro metallographic structure
  • 6.9 Shear bond strength of inner composite steel pipe
  • 6.10 Tightness of lining composite steel pipe
  • 6.11 High temperature collapse resistance of lining composite steel pipe
  • 6.12 Intergranular corrosion resistance of CRA layer
  • 6.13 Corrosion resistance of the base layer
  • 6.14 Corrosion resistance of CRA layer
  • 6.15 Tube Residual Strength
  • 6.16 Hydrostatic test strength
  • 6.17 Surface conditions, imperfections and defects
  • 6.18 Dimensions, masses and their deviations
  • 7 Test method
  • 7.1 Chemical composition analysis
  • 7.2 Tensile test
  • 7.3 Fracture Toughness Test
  • 7.4 Guide bending test
  • 7.5 Flattening test
  • 7.6 Section hardness test
  • 7.7 Macroscopic and microscopic metallographic examination of welds
  • 7.8 Shear bond strength test of inner composite steel pipe
  • 7.9 Tightness test of lining composite steel pipe
  • 7.10 High temperature collapse test of lining composite steel pipe
  • 7.11 Intergranular corrosion test
  • 7.12 Corrosion test of the base layer
  • 7.13 Evaluation of corrosion resistance of CRA layer
  • 7.14 Tube Residual Strength Test
  • 7.15 Hydrostatic test
  • 7.16 Visual inspection
  • 7.17 Dimensional Inspection and Weighing
  • 7.18 Nondestructive testing
  • 8 Inspection rules
  • 8.1 Inspection items
  • 8.2 Sampling method
  • 8.3 Inspection frequency
  • 8.4 Re-inspection
  • 9 logo
  • 9.1 Sign method
  • 9.2 Marking position
  • 9.3 Mark content
  • 10 Packaging, storage and protection
  • 11 File
  • Appendix A (Normative) Manufacturing Process Assessment
  • Appendix B (normative appendix) Lining composite steel pipe tightness test method
  • Appendix C (informative) Corrosion test method for base materials
  • Appendix D (Normative) Corrosion test method for CRA layer materials
  • Appendix E (Normative) Handling of Defects and Defects

1 Scope

This standard specifies the purchaser's instructions, manufacture, and use of the inner or lining corrosion-resistant alloy composite steel pipe for the oil and gas industry pipeline transportation system.

Physical and chemical properties, test methods, inspection rules, marking, packaging, storage and protection, and documentation requirements.

This standard is applicable to the corrosion-resistant alloys for fluids such as petroleum, natural gas and water containing corrosive media in the oil and gas industry.

Composite steel pipe.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 228.1 tensile testing of metallic materials - Part 1

GB/T 228.2 tensile testing of metallic materials - Part 2.

GB/T 229 metal material Charpy pendulum impact test method

GB/T 2653 welded joint bending test method

GB/T 4334-2008 Corrosion of metals and alloys

GB/T 4340.1 Metallic materials - Vickers hardness test - Part 1. Test method

GB/T 6394-2017 Method for determination of average grain size of metals

GB/T 6396 composite steel plate mechanical and process performance test method

GB/T 8923.1-2011 - Determination of surface cleanliness of steels - Part 1 . Uncoated

Corrosion grade and treatment grade of the surface of the steel and the surface of the steel after the original coating is completely removed

GB/T 9445 Non-destructive testing personnel qualification and certification

GB/T 13298 metal microstructure inspection method

GB/T 15970.2 Corrosion stress corrosion test of metals and alloys - Part 2. Preparation and application of curved beam specimens

GB/T 18590 Corrosion pitting evaluation method for metals and alloys

GB 50251 gas pipeline engineering design specification

GB 50253 Oil Pipeline Engineering Design Specification

NB/T 47002.1-2009 Explosive welded composite sheets for pressure vessels - Part 1. Stainless steel - steel composite panels

NB/T 47002.2-2009 Explosive welded composite sheets for pressure vessels - Part 2. Nickel-steel composite panels

NB/T 47013.3 Non-destructive testing of pressure equipment - Part 3. Ultrasonic testing

NB/T 47013.4 Non-destructive testing of pressure equipment - Part 4. Magnetic particle testing

NB/T 47013.5-2015 Non-destructive testing of pressure equipment - Part 5. Penetration testing

NB/T 47013.7 Non-destructive testing of pressure equipment - Part 7. Visual inspection

NB/T 47014 Pressure welding equipment welding process evaluation

NB/T 47015 Pressure Vessel Welding Procedure

SY/T 4109 Non-destructive testing of oil and gas steel pipelines

SY/T 6423.1 Non-destructive testing methods for steel tubes for oil and gas industry - Part 1 […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 34 pages — is available in the English PDF.

Similar standards

How to Download GB/T 37701-2019

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
34 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 37701-2019

$510.00