GB/T 37654-2019Remanufacturing—Technical specification for arc spray (English PDF)
再制造 电弧喷涂技术规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 37654-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
June 4, 2019
Implementation date
January 1, 2020
Scope
GB/T 37654-2019 is the English-translated version of 再制造 电弧喷涂技术规范.
GB/T 37654-2019 is the Chinese standard "Remanufacturing—Technical specification for arc spray". Its scope clause reads: This standard specifies technical specifications for the application of arc spray technology for remanufacturing, including terms and definitions, general requirements, processes, and workmanship.
Art assessment and quality inspection, packaging, storage and transportation, site, labor safety and environmental protection requirements. This standard applies to remanufacturing production, scientific research and management based on arc spraying technology, and other related work can also be used. Its clauses include terms and definitions; general requirements.
Found what you need?
Document preview — GB/T 37654-2019
National Standard of the People's Republic of China
- ICS
- 25.220
- Classification
- J 04
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 General requirements
- 5 Process
- 6 Spraying process evaluation and quality inspection
- 7 Packaging, storage and transportation
- 8 Site, labor safety and environmental protection requirements
1 Scope
This standard specifies technical specifications for the application of arc spray technology for remanufacturing, including terms and definitions, general requirements, processes, and workmanship.
Art assessment and quality inspection, packaging, storage and transportation, site, labor safety and environmental protection requirements.
This standard applies to remanufacturing production, scientific research and management based on arc spraying technology, and other related work can also be used.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
Determination of tensile strength of GB/T 8642 thermal spray
GB/T 11375 Metal and other inorganic coatings for thermal spray operation safe
GB/T 28619 Remanufacturing terminology
3 Terms and definitions
The following terms and definitions as defined in GB/T 28619 apply to this document.
3.1 Arc spraying arcspray
The top end of the wire is melted by the arc generated between the two wires, and the composition of the two wires may be the same or different.
A beam or a plurality of gas jets (generally compressed air) atomizes the molten metal droplets onto the surface of the pretreated substrate to form a coating
Process method.
[GB/T 18719-2002, definition 4.3.5]
3.2 High speed arc spraying highvelocityarcspray
Using an electric arc to heat the tip of the wire to a molten state, through a supersonic gas stream (including compressed air, gas, inert gas, etc.)
A process in which a sprayed material in a molten state is sprayed onto a surface of a pretreated substrate to form a coating at a high speed.
3.3 Automated arc spraying
Clamping and controlling high-speed arc spraying separately through auxiliary mechanisms such as operating mechanisms (including operating special machines, industrial robots, etc.) and positioners
Gun and workpiece, the arc welding method to automate the operation according to the setting procedure.
4 General requirements
4.1 Arc spraying equipment
4.1.1 High speed arc spray gun
The high-speed arc spray gun is a device for completing the arc-smelting, atomizing and accelerating flight operations of the wire material, and the following should be satisfied in the application.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 37654-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 37654-2019
$145.00