GB/T 37644-2019Determination of oxyquinoline and nitroxoline in cosmetics—High performance liquid chromatography (English PDF)
化妆品中8-羟基喹啉和硝羟喹啉的测定 高效液相色谱法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 37644-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
June 4, 2019
Implementation date
January 1, 2020
Scope
GB/T 37644-2019 is the English-translated version of 化妆品中8-羟基喹啉和硝羟喹啉的测定 高效液相色谱法.
GB/T 37644-2019 gives a high performance liquid chromatography method for the determination of 8-hydroxyquinoline and nitroquinoline in cosmetics, the two substances the page also lists as oxyquinoline and nitroxoline.
Clause 1 says the standard specifies the principles, the reagents and materials, the equipment, the test procedures, the calculation of results, the recovery and precision and the allowable difference of that method, and that it applies to the determination of those two substances in cosmetics.
The same clause sets the limits: for cosmetics other than wax base and powder products the detection limit of 8-hydroxyquinoline and nitroquinoline is 1.5 mg/kg and the limit of quantification is 5.0 mg/kg, while for wax-based and powder cosmetics the figures are 3.0 mg/kg and 10.0 mg/kg.
The introduction explains why the method exists: nitroquinoline is a banned substance under China's Cosmetic Safety Technical Specification (2015 Edition), which means it cannot be added to a cosmetic as a raw material and calls for a safety risk assessment where it cannot technically be kept out as an impurity, and since China has not specified limit values for these substances the standard provides only the testing method.
Clause 2 cites GB/T 6682.
Clause 3 states the principle, which is that the two substances are extracted from the sample ultrasonically with solvent and determined on a high performance liquid chromatograph fitted with a diode array detector, with retention time and spectrogram for the qualitative result, the external standard method for quantification and high performance liquid chromatography-mass spectrometry/mass spectrometry for confirmation.
Clause 4 lists the reagents and materials, from water, methanol, acetonitrile, formic acid, phosphoric acid and sodium octane sulfonate to the prepared solutions and the mixed standard working solution, and it requires reference material of not less than 98% purity, whose Chinese name, INCI name, English name, CAS number, molecular formula, relative molecular mass and structural formula are given in Table A.1 of Appendix A. The draft breaks off inside that clause, so the test procedure and the result clauses are not shown. It was issued on June 4, 2019 and has applied since January 1, 2020.
Found what you need?
Document preview — GB/T 37644-2019
National Standard of the People's Republic of China
- ICS
- 71.100.70
- Classification
- Y 42
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- Introduction
- 1 Scope
- 2 Normative references
- 3 Principle
- 4 Reagents and materials
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
Introduction
The test substance of this standard, nitroquinoline, is a banned substance stipulated in China's Cosmetic Safety Technical Specification (2015 Edition).
A banned substance is a substance that cannot be added to a cosmetic as a raw material for cosmetic production. Cosmetics Safety Technical Specifications (2015 edition) stipulates. If it is technically impossible to avoid the banned substances as impurities into the cosmetics, a safety risk assessment should be carried out to ensure Under normal, reasonable and foreseeable conditions of use, no harm may be caused to human health.
At present, China has not specified the limit value of these substances. This standard only provides testing methods for the determination of these substances in cosmetics.
1 Scope
This standard specifies the principles, reagents and materials for the HPLC method for the determination of 8-hydroxyquinoline and nitroquinoline in cosmetics.
Equipment, test procedures, calculation of results, recovery and precision, allowable difference, etc.
This standard applies to the determination of 8-hydroxyquinoline and nitroquinoline in cosmetics.
The detection limit and limit of quantification of this standard. cosmetics (except wax base, powder). the detection limit of 8-hydroxyquinoline and nitroquinoline is 1.5mg/kg, the limit of quantification is 5.0mg/kg; the detection limit of wax-based and powder cosmetics. 8-hydroxyquinoline and nitroquinoline is 3.0mg/kg, quantitative The limit is 10.0 mg/kg.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 6682 Analytical laboratory water specifications and test methods
3 Principle
The 8-hydroxyquinoline and nitroquinoline in the sample were ultrasonically extracted by solvent, and the high performance liquid chromatograph equipped with a diode array detector was used.
Determination, retention time and spectrogram qualitative, external standard method for quantification. High performance liquid chromatography-mass spectrometry/mass spectrometry legal confirmation.
4 Reagents and materials
4.1 Water. Primary water specified in GB/T 6682.
4.2 Methanol. Chromatographically pure.
4.3 Acetonitrile. Chromatographically pure.
4.4 Formic acid. chromatographically pure.
4.5 Phosphoric acid. analytically pure.
4.6 Sodium octane sulfonate. analytically pure.
4.7 Reference material. The purity is not less than 98%. Chinese name and INCI name of 8-hydroxyquinoline and nitroquinoline (International cosmetic raw material name)/English name, CAS number, molecular formula, relative molecular mass and structural formula, see Table A.1 in Appendix A.
4.8 0.01mol/L sodium octane sulfonate solution. Weigh 1.08g sodium octane sulfonate (4.6), dilute with water to 500mL, and adjust with phosphoric acid (4.5) The pH is adjusted to 2.5.
4.9 Aqueous Phosphoric Acid Solution. Pipette an appropriate amount of water and adjust the pH to 2.5 with phosphoric acid (4.5).
4.10 Methanol - 0.01 mol/L sodium octane sulfonate solution. methanol 0.01 mol/L sodium octane sulfonate solution = 7 3 (volume ratio).
4.11 Formic acid-acetonitrile solution. acetonitrile formic acid = 1 99 (volume ratio).
4.12 Aqueous solution of methanol-phosphoric acid. aqueous solution of methanolic phosphoric acid = 7 3 (volume ratio).
4.13 Mixed standard working solution. Accurately weigh the standard substance (4.7) 10.0mg (accurate to 0.1mg) with methanol-0.01mol/L octane Dissolve sodium sulfonate solution (4.10) and dilute to 10mL to obtain standard stock solution (rho=1000.0mg/L, preserved at 4°C from light, can be protected Save for 2 months). Transfer the appropriate amount of standard stock solution separately and dilute to mass with methanol-0.01mol/L sodium octane sulfonate solution (4.10).
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
Similar standards
How to Download GB/T 37644-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 6682-1992 — Water for analytical laboratory use--Specification and test methods
GB/T 6682-2008 — Water for analytical laboratory use - Specification and test methods
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 37644-2019
$145.00