GB/T 37587-2019Technical specification for corrosion resistance of buried steel bend pipe polyethylene anti-corrosion tapes (English PDF)
埋地钢质弯管聚乙烯防腐带耐蚀作业技术规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 37587-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
June 4, 2019
Implementation date
May 1, 2020
Scope
GB/T 37587-2019 is the English-translated version of 埋地钢质弯管聚乙烯防腐带耐蚀作业技术规范.
GB/T 37587-2019 is the Chinese standard "Technical specification for corrosion resistance of buried steel bend pipe polyethylene anti-corrosion tapes".
Its scope clause reads: This standard specifies the anti-corrosion layer structure, materials, corrosion resistance, quality inspection and rules, and product standards of buried steel bent pipe polyethylene anti-corrosion belt.
Knowledge, storage and transportation, anti-corrosion layer repair, safety, sanitation and environmental protection, anti-corrosion bends, backfilling, document management and other requirements.
This standard applies to polyethylene composite belt working temperature <= 80 ° C, radiation cross-linked polyethylene heat shrinkable belt working temperature <= 70 ° C, nominal straight Corrosion-resistant operation, inspection and acceptance of steel anti-corrosion coating with steel >=100mm and bending radius >=5Dmm.
Found what you need?
Document preview — GB/T 37587-2019
National Standard of the People's Republic of China
- ICS
- 75.200
- Classification
- E 98
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 anti-corrosion layer structure and thickness level
- 5 Material
- 6 Corrosion resistant work
- 7 Quality Inspection and Rules
- 8 Product Identification
- 9 Storage and transportation
- 10 anti-corrosion layer repair
- 11 Safety, health and environmental protection
- 12 Backfill of the anti-corrosion bend pipe
- 13 Document Management
1 Scope
This standard specifies the anti-corrosion layer structure, materials, corrosion resistance, quality inspection and rules, and product standards of buried steel bent pipe polyethylene anti-corrosion belt.
Knowledge, storage and transportation, anti-corrosion layer repair, safety, sanitation and environmental protection, anti-corrosion bends, backfilling, document management and other requirements.
This standard applies to polyethylene composite belt working temperature <= 80 ° C, radiation cross-linked polyethylene heat shrinkable belt working temperature <= 70 ° C, nominal straight
Corrosion-resistant operation, inspection and acceptance of steel anti-corrosion coating with steel >=100mm and bending radius >=5Dmm.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
Determination of tensile properties of plastics - Part 2. Test conditions for moulding and extruded plastics
GB/T 1408.1 Test methods for electrical strength of insulating materials - Part 1
GB/T 1410 solid insulating material volume resistivity and surface resistivity test method
GB/T 1633 Determination of Vicat softening temperature (VST) of thermoplastics
GB/T 1725 Determination of non-volatile content of paints, varnishes and plastics
GB/T 1842 plastic polyethylene environmental stress cracking test method
GB/T 3682 Determination of melt flow rate and melt volume flow rate of thermoplastics
GB/T 4472 Determination of density and relative density of chemical products
GB/T 5210 paint and varnish pull-off adhesion test
Determination of embrittlement temperature of GB/T 5470 plastic impact method
GB 6514 Painting operation safety regulations Painting process safety and ventilation purification
GB/T 6554 Resin-based reactive composites for electrical insulation - Part 2
GB/T 7124 Determination of tensile shear strength of adhesives (rigid materials to rigid materials)
GB 7692 Painting operation safety regulations Pre-painting process safety and ventilation purification
GB/T 8923.1.Determination of surface cleanliness of steels - Part 1 . Uncoated steel
Corrosion grade and treatment grade of the surface of the steel after surface and overall removal of the original coating
GB/T 13021 Determination of carbon black content of polyethylene pipes and fittings (thermal weight loss method)
GB/T 15332 Determination of softening point of hot melt adhesives
GB/T 15558.1 Gas-filled polyethylene (PE) piping systems - Part 1. Pipe
GB/T 18570.3 - Evaluation of surface cleanliness of steels -- Part 3.
Surface dust evaluation (pressure sensitive tape method)
GB/T 18570.9.Determination of surface cleanliness of steels.
Conductivity measurement
GB/T 23257-2017 Buried steel pipeline polyethylene anti-corrosion layer
GB/T 50087 industrial enterprise noise control design specification
GB 50369 Oil and Gas Long Distance Pipeline Engineering Construction and Acceptance Specifications […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 37587-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 37587-2019
$235.00