Valid

GB/T 37581-2019Requirements for impervious graphite equipment corrosion control engineering life cycle (English PDF)

不透性石墨设备腐蚀控制工程全生命周期要求

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 37581-2019 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

June 4, 2019

Implementation date

May 1, 2020

Scope

GB/T 37581-2019 is the English-translated version of 不透性石墨设备腐蚀控制工程全生命周期要求.

GB/T 37581-2019 is the Chinese standard "Requirements for impervious graphite equipment corrosion control engineering life cycle".

Its scope clause reads: This standard specifies the general principles, objectives, corrosion sources, materials, and techniques for corrosion prevention of impervious graphite equipment throughout the life cycle of corrosion control engineering.

Surgery, development, design, manufacture, construction and installation, loading and unloading, storage and transportation, commissioning, acceptance, operation, test and inspection, maintenance, repair, life extension, Resources, scrapping, post-event green environmental protection early warning, documentation and records, and assessment of general requirements for each control element.

This standard applies to the management of related activities throughout the life cycle of corrosion control engineering for various types of impervious graphite equipment. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 37581-2019

National Standard of the People's Republic of China

ICS
03.100.99
Classification
A 01

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.1 Impervious graphite
  • 3.2 Graphite material graphiteite
  • 3.3 Impregnated graphite
  • 3.4 Impregnation agent
  • 3.5 Graphite binder

1 Scope

This standard specifies the general principles, objectives, corrosion sources, materials, and techniques for corrosion prevention of impervious graphite equipment throughout the life cycle of corrosion control engineering.

Surgery, development, design, manufacture, construction and installation, loading and unloading, storage and transportation, commissioning, acceptance, operation, test and inspection, maintenance, repair, life extension,

Resources, scrapping, post-event green environmental protection early warning, documentation and records, and assessment of general requirements for each control element.

This standard applies to the management of related activities throughout the life cycle of corrosion control engineering for various types of impervious graphite equipment.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 33314-2016 Corrosion control engineering life cycle general requirements

3 Terms and definitions

The following terms and definitions apply to this document.

3.1 Impervious graphite

A graphite material that does not penetrate gas or liquid phase at the current industrial level.

Note. Impervious graphite includes impregnated graphite, pressed (including extruded and molded) graphite, cast graphite and composite graphite.

3.2 Graphite material graphiteite

After coke or graphite powder and particles and asphalt are mixed, extruded, molded (or vibrated), and then heated at a temperature of about 2400 ° C ~ 3000 ° C

A graphitized material formed underneath.

3.3 Impregnated graphite

Graphite formed by pressing an organic or inorganic liquid material (impregnant) into the pores of the transparent graphite material and solidifying it in the pores.

Note 1. Different varieties are formed due to the difference in the impregnating agent used to increase the permeability resistance of the material.

Note 2. The most widely used industrial grade is phenolic impregnated graphite impregnated with phenolic resin, followed by furan impregnated graphite and epoxy resin impregnated

Graphite, polytetrafluoroethylene impregnated graphite, water glass impregnated graphite, and the like.

3.4 Impregnation agent

A material that is impermeable to carbon or graphite materials by a curing process.

3.5 Graphite binder

A mixture of graphite powder and resin.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 37581-2019

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 37581-2019

$165.00