GB/T 37580-2019Requirements for buried polyethylene (PE) gas pipeline corrosion control engineering life cycle (English PDF)
聚乙烯（PE）埋地燃气管道腐蚀控制工程全生命周期要求
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 37580-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
June 4, 2019
Implementation date
May 1, 2020
Scope
GB/T 37580-2019 is the English-translated version of 聚乙烯（PE）埋地燃气管道腐蚀控制工程全生命周期要求.
GB/T 37580-2019 is the Chinese standard "Requirements for buried polyethylene (PE) gas pipeline corrosion control engineering life cycle".
Its scope clause reads: This standard specifies the general rules, objectives, corrosion sources, materials, and techniques during the whole life cycle of polyethylene (PE) buried gas pipeline corrosion control engineering.
Technology, development, design, manufacturing, construction and installation, loading and unloading storage and transportation, commissioning, acceptance, test and inspection, maintenance, repair, life extension, resources Retirement and post-event green environmental protection early warning, documentation and records, assessment of the requirements of the various elements to be controlled.
This standard applies to the management of activities related to the corrosion life control process of polyethylene (PE) buried gas pipelines. Its clauses include terms and definitions; general.
Found what you need?
Document preview — GB/T 37580-2019
National Standard of the People's Republic of China
- ICS
- 03.100.99
- Classification
- A 01
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 General
1 Scope
This standard specifies the general rules, objectives, corrosion sources, materials, and techniques during the whole life cycle of polyethylene (PE) buried gas pipeline corrosion control engineering.
Technology, development, design, manufacturing, construction and installation, loading and unloading storage and transportation, commissioning, acceptance, test and inspection, maintenance, repair, life extension, resources
Retirement and post-event green environmental protection early warning, documentation and records, assessment of the requirements of the various elements to be controlled.
This standard applies to the management of activities related to the corrosion life control process of polyethylene (PE) buried gas pipelines.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 15558.1 Gas-filled polyethylene (PE) piping systems - Part 1. Pipe
GB/T 15558.2 Gas-filled polyethylene (PE) piping systems - Part 2. Pipe fittings
GB/T 15558.3 Gas-filled polyethylene (PE) piping systems - Part 3. Valves
GB/T 26255.1 Mechanical piping for polyethylene piping systems - Part 1 . Pipes with a nominal outside diameter not exceeding 63 mm
Steel-plastic conversion pipe fittings
GB/T 26255.2 Mechanical piping for polyethylene piping systems - Part 2. Steels for pipes with a nominal outside diameter of more than 63 mm
Plastic conversion pipe fittings
GB/T 29639 Production and business unit production safety accident emergency plan preparation guidelines
GB/T 33314-2016 Corrosion control engineering life cycle general requirements
Technical specification for CJJ63 polyethylene gas pipeline engineering
TSGD2002 Gas Pipeline Welding Technology Rules for Gas
3 Terms and definitions
The following terms and definitions apply to this document.
3.1
Polyethylene (PE) buried gas pipeline corrosion control engineering life cycle buriedpolyethylene (PE) gaspipeline
Corrosioncontrolengineeringlifecycle
Corrosion-resistant polyethylene (PE) buried gas pipelines are based on materials and initial surveys, operating conditions, product design and manufacturing, piping design to
Construction, acceptance, operation, maintenance, ambient temperature, service life assessment, scrapping and post-event green environmental treatment of the entire application control process.
3.2 Corrosion source
A general term for various factors that cause or cause corrosion of polyethylene (PE) buried gas pipelines.
4 General
4.1
Polyethylene (PE) buried gas pipeline (hereinafter referred to as pipeline) full life cycle requirements should be throughout the entire life cycle of the pipeline system […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 37580-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 37580-2019
$205.00