GB/T 37531-2019Single turnout for straddle monorail transit (English PDF)
跨座式单轨交通单开道岔
This is a limited preview
Buy now to download the full PDF (20 pages)
Need quotation for your management?
Get a formal quotation for GB/T 37531-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
June 4, 2019
Implementation date
January 1, 2020
Scope
GB/T 37531-2019 is the English-translated version of 跨座式单轨交通单开道岔.
GB/T 37531-2019 is the Chinese standard "Single turnout for straddle monorail transit". Its scope clause reads: This standard specifies the classification form, general requirements, special requirements, technical requirements of main components of the system, and the technical requirements of the main components of the system.
Test methods, inspection rules, marking, packaging, transportation and storage. This standard is applicable to straddle type monorail traffic single turnouts with 820mm and 700mm track beam width.
Found what you need?
Document preview — GB/T 37531-2019
National Standard of the People's Republic of China
- ICS
- 45.080
- Classification
- Q 84
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Classification
- 5 General requirements
- 6 Special requirements
- 7 System main components technical requirements
- 8 Test method
- 9 Inspection rules
- 10 Marking, packaging, transport and storage
- Appendix A (Normative Appendix) Switching Mounting Accuracy
1 Scope
This standard specifies the classification form, general requirements, special requirements, technical requirements of main components of the system, and the technical requirements of the main components of the system.
Test methods, inspection rules, marking, packaging, transportation and storage.
This standard is applicable to straddle type monorail traffic single turnouts with 820mm and 700mm track beam width.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 191 packaging storage and transportation icon
GB/T 699 high quality carbon structural steel
GB/T 700 carbon structural steel
GB/T 1184 Shape and position tolerances without tolerance values
GB/T 1348 ductile iron castings
GB/T 1591 low alloy high strength structural steel
GB/T 1804 General tolerances No tolerances for linear and angular dimensions tolerances
GB/T 2423.1 Environmental testing of electrical and electronic products - Part 2. Test methods Test A. Low temperature
GB/T 2423.2 Environmental testing of electrical and electronic products - Part 2. Test methods Test B. High temperature
GB/T 2423.4 Environmental testing of electric and electronic products - Part 2. Test method Test Db. alternating heat (12h 12h cycle)
GB/T 2585 hot rolled rail for railway
GB/T 3077 alloy structural steel
GB/T 3098.1 Fastener mechanical properties bolts, screws and studs
Calculation method for bearing capacity of GB/T 3480 involute cylindrical gear
GB/T 4768 mildew proof packaging
GB/T 4879 anti-rust packaging
GB/T 5048 moisture-proof packaging
GB/T 5782 Hex Head Bolt
GB/T 6391 rolling bearing rated dynamic load and rated life
GB/T 6404.1 Acceptance specification for gear units - Part 1. Test specification for airborne noise
GB/T 7284 frame wooden box
GB/T 7350 waterproof packaging
GB/T 8162 structural seamless steel pipe
GB/T 10062.1 Calculation methods for load capacity of bevel gears - Part 1
GB/T 10062.2 calculation method of load capacity of bevel gears - Part 2
GB/T 10062.3 Calculation of bearing capacity of bevel gears - Part 3
GB/T 10095.1 Precision of cylindrical gears - Part 1. Definitions and permissible values
GB/T 10095.2 Precision of cylindrical gears - Part 2. Definitions and permissible values of radial integrated deviation and radial runout […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 37531-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 37531-2019
$355.00