GB/T 37521.3-2019Security check for anti-explosives at key place—Part 3: Procedure (English PDF)
重点场所防爆炸安全检查 第3部分:规程
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 37521.3-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
June 4, 2019
Implementation date
December 1, 2019
Scope
GB/T 37521.3-2019 is the English-translated version of 重点场所防爆炸安全检查 第3部分:规程.
GB/T 37521.3-2019 is the Chinese standard "Security check for anti-explosives at key place - Part 3: Procedure". Its scope clause reads: This Part of GB/T 37521 specifies the basic requirements, flow, procedures and methods, preparation, implementation, and disposal of explosive devices for security check for anti-explosives at key place.
This Part applies to the process of security check for anti-explosives at key place. Its clauses include terms and definitions; basic requirements; flow of security check for anti-explosives; procedures and methods; preparation of security check for anti-explosives; implementation of security check for anti-explosives; disposal of explosive devices.
It was issued by the State Administration for Market Regulation on JUNE 04, 2019 and took effect on DECEMBER 01, 2019.
Found what you need?
Document preview — GB/T 37521.3-2019
National Standard of the People's Republic of China
- ICS
- 13.200
- Classification
- A 90
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword3
- 1 Scope4
- 2 Normative references4
- 3 Terms and definitions4
- 4 Basic requirements5
- 5 Flow of security check for anti-explosives5
- 6 Procedures and methods6
- 6.1 Security check for anti-explosives for personnel and articles6
- 6.2 Security check for anti-explosives for vehicles6
- 6.3 Security check for anti-explosives for sites7
- 7 Preparation of security check for anti-explosives7
- 8 Implementation of security check for anti-explosives7
- 8.1 Security check of personnel and articles7
- 8.2 Security check of vehicles8
- 8.3 Security check of sites8
- 9 Disposal of explosive devices9
- 9.1 Early disposal9
- 9.2 Professional disposal10
- Bibliography11
1 Scope
This Part of GB/T 37521 specifies the basic requirements, flow, procedures and methods, preparation, implementation, and disposal of explosive devices for security check for anti-explosives at key place.
This Part applies to the process of security check for anti-explosives at key place.
2 Normative references
The following documents are indispensable for the application of this document.
For the dated references, only the editions with the dates indicated are applicable to this document. For the undated references, the latest edition (including all the amendments) are applicable to this document.
GB/T 37521.1 Security check for anti-explosives at key place - Part 1: Foundations
GB/T 37521.2 Security check for anti-explosives at key place - Part 2: Capability assessment
GA/T 1156 Specifications for disposal of explosives and explosion scene
3 Terms and definitions
The terms and definitions defined in GB/T 37521.1 and GB/T 37521.2 and the following ones apply to this document.
3.1 Intuitive check
The search by means of anti-explosives security inspectors' senses (listening, watching, smelling, touching) and empirical judgment without the aid of equipment and animal for security check for anti-explosives.
6 Procedures and methods
6.1 Security check for anti-explosives for personnel and articles
6.1.1 Procedures
6.1.1.1 For security check for anti-explosives for personnel and articles, it shall carry out normal security check first.
6.1.1.2 After the normal security check, if it is found that a person holds or article contains an explosive device, it shall be disposed of. After the normal security check, if it is found that a person holds or article contains a suspected explosive device, it shall carry out a sampling security check.
6.1.1.3 If the explosive device is found through the sampling security check, it shall be disposed of.
6.1.2 Methods
6.1.2.1 The normal security check shall combine the methods of intuitive check and instrument check.
6.1.2.2 Sampling security check shall be carried out using the equipment required by GB/T 37521.1, animal check if necessary.
6.2 Security check for anti-explosives for vehicles
6.2.1 Procedures
6.2.1.1 For security check for anti-explosives for vehicles, it shall carry out normal security check first.
6.2.1.2 After the normal security check, if it is found that the vehicle or the contents of the vehicle contain an explosive device, it shall be disposed of. After the normal security check, if it is found that the vehicle or the contents of the vehicle contain a suspected explosive device, it shall carry out a sampling security check.
6.2.1.3 If the explosive device is found through the sampling security check, it shall be disposed of.
6.2.2 Methods
6.2.2.1 The normal security check shall combine the methods of intuitive check and instrument check.
8 Implementation of security check for anti-explosives
8.1 Security check of personnel and articles
8.1.1.2 The check of the disabled shall not touch the disabled parts of the disabled. The blind shall be regarded as a normal person for security check.
8.1.2 Sampling security check
After the normal security check, if the personnel and articles are found to hold (contain) suspected explosive devices, the security inspectors shall conduct a sampling security check on them. The sampling security check shall be carried out in the sampling security check area using dedicated instruments or animals.
When conducting a personnel sampling security check, two security inspectors of the same sex as the examinee shall be present at the same time.
8.2 Security check of vehicles
8.2.1 Normal security check
8.2.1.1 USE the inspector's senses (listening, watching, smelling, touching) for intuitive check of parts such as the appearance, cockpit, engine compartment, luggage compartment (cargo compartment) of vehicle.
8.2.1.2 USE equipment such as a sight glass, vehicle chassis inspection-mirror, roof inspection-mirror to check parts such as fuel tank, chassis, roof, wheel gap of the vehicle. If necessary, animal may be used to check the vehicle.
8.2.1.3 If necessary, security check for anti-explosives shall be conducted on personnel and articles in the vehicle. See 8.1 for procedures.
8.2.2 Sampling security check
After the normal security check, if the vehicle is found to contain suspected explosive devices, the security inspector shall, in the sampling security check area, use professional instruments or animals for sampling security check of the suspicious vehicles.
8.3 Security check of sites
8.3.1 Survey before patrolling security check
VIEW the structure inside and outside the site to be checked and its environmental characteristics in detail.
8.3.2 Identify key parts
Key parts for security check of sites include but are not limited to:
a) Rostrum; […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 37521.3-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 37521.1-2019 — Security check for anti-explosives at key place—Part 1: Foundations
GB/T 37521.2-2019 — Security check for anti-explosives at key place—Part 2: Capability assessment
GB/T 7251.4-2026 — Low-voltage switchgear and controlgear assemblies - Part 4: Particular requirements for assemblies for construction sites (ACS)
Secure payment via Stripe
Payments accepted
GB/T 37521.3-2019
$105.00