GB/T 37510-2019Inspection of grain and oils—Swelling properties test of wheat flour (English PDF)
粮油检验 小麦粉膨胀势的测定
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 37510-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
May 10, 2019
Implementation date
December 1, 2019
Scope
GB/T 37510-2019 is the English-translated version of 粮油检验 小麦粉膨胀势的测定.
GB/T 37510-2019 is the Chinese standard "Inspection of grain and oils—Swelling properties test of wheat flour". Its scope clause reads: This standard specifies the terms and definitions, principles, instruments, reagents, samples, operation procedures, results calculations and tables for the determination of wheat flour swelling potential.
Report, precision and results report. This standard is applicable to the evaluation of starch quality characteristics of wheat flour. Its clauses include terms and definitions; principle; instruments.
Found what you need?
Document preview — GB/T 37510-2019
National Standard of the People's Republic of China
- ICS
- 67.040
- Classification
- X 04
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Principle
- 5 instruments
1 Scope
This standard specifies the terms and definitions, principles, instruments, reagents, samples, operation procedures, results calculations and tables for the determination of wheat flour swelling potential.
Report, precision and results report.
This standard is applicable to the evaluation of starch quality characteristics of wheat flour.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB 5009.3 National standard for food safety - Determination of moisture in foods
GB/T 5490 General rules for grain and oil inspection
GB/T 5491 Inspection of food and oil materials, sampling method
GB/T 6682 Analytical laboratory water specifications and test methods
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Expansion potential flourswelingvolume;FSV
The ratio of the volume of the obtained starch gel to the mass of the dry basis of the sample after gelatinization for a specified period of time at a certain temperature.
Note. The unit is milliliters per gram (mL/g).
4 Principle
Under the specified conditions, the wheat flour is gelatinized, the gel produced by the solvent is centrifuged, the gel length is measured, and converted into a volume to calculate the gel volume and
The ratio of the dry mass of the sample. The swelling potential is related to the ratio of amylose-amylopectin in wheat flour, reflecting the progress of wheat flour in the gelatinization process.
The water absorption and the water holding capacity of the paste after centrifugation under certain conditions.
5 instruments
5.1 FSV hot water bath mixer
The test tube can be turned upside down in hot water. See Appendix A for illustration.
5.2 Hot water bath
can accommodate the mixing rack and control the water temperature at 92.5 ° C, temperature stability. ± 0.2 ° C. External dimensions. 56cm ×
35cm × 33cm, volume 8L ~ 22L, see Appendix A for the illustration.
Note. The temperature of the water bath will drop after the mixing rack and test tube are placed in the hot water bath. To ensure that the test error is minimized, the temperature of the hot water bath is required to not fall.
1.5 ° C, and returned to 92.5 ° C within 5 min.
5.3 Centrifuge
Adjustable speed to 1000 × g.
5.4 Test tube
high temperature resistant, with a screwable lid and good sealing. The recommended size is 16mm × 125mm, the volume is not small […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 37510-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 37510-2019
$205.00