GB/T 37472-2019General requirements for heave compensation system of submersible mothership (English PDF)
潜水器母船升沉补偿系统通用要求
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 37472-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
May 10, 2019
Implementation date
December 1, 2019
Scope
GB/T 37472-2019 is the English-translated version of 潜水器母船升沉补偿系统通用要求.
GB/T 37472-2019 is the Chinese standard "General requirements for heave compensation system of submersible mothership". Its scope clause reads: This standard specifies the requirements, test methods, inspection rules, signs, packaging, and transportation of the submersible compensation system for the submersible (or diving bell), and storage.
This standard applies to the design, manufacture and test acceptance of the submersible (or diving clock) mother ship heave compensation system (hereinafter referred to as the system). Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 37472-2019
National Standard of the People's Republic of China
- ICS
- 47.020.50
- Classification
- U 22
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Submersible mother ship
1 Scope
This standard specifies the requirements, test methods, inspection rules, signs, packaging, and transportation of the submersible compensation system for the submersible (or diving bell).
And storage.
This standard applies to the design, manufacture and test acceptance of the submersible (or diving clock) mother ship heave compensation system (hereinafter referred to as the system).
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 699-2015 high quality carbon structural steel
General rules and safety requirements for GB/T 3766 hydraulic drive systems and their components
GB/T 4208 enclosure protection grade (IP code)
GB 5226.1 Mechanical electrical safety machinery and electrical equipment - Part 1. General technical conditions
GB/T 6994 Marine electrical equipment definition and general provisions
GB/T 7061 Marine low-voltage switchgear and control equipment
GB/T 10250-2007 Electromagnetic compatibility of marine electrical and electronic equipment
GB/T 11352-2009 Cast carbon steel parts for general engineering
GB/T 12920 General technical requirements for marine pneumatic systems
General technical conditions for GB/T 13384 mechanical and electrical product packaging
GB/T 27546 hoisting machinery pulley
GJB5049 General Specification for High Pressure Air Bottles for Submarines
CB1146.2 Environmental Test and Engineering Guidelines for Ship Equipment
CB1146.3 Marine equipment environmental test and engineering guidelines for high temperature
CB1146.4 Environmental Test and Engineering Guide for Ship Equipment Damp Heat
CB1146.8 Marine Equipment Environmental Testing and Engineering Guidelines Tilting and Swinging
CB1146.9 Marine equipment environmental test and engineering guidelines vibration (sinusoidal)
CB1146.11 Environmental Test and Engineering Guidelines for Ship Equipment Mold
CB1146.12 Environmental Test and Engineering Guide for Ship Equipment Salt Spray
JB/T 10205 hydraulic cylinder
Materials and Welding Specifications (China Classification Society)
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Submersible mother ship
A general term for surface vessels and surface platforms that support and carry a variety of submersibles (including diving bells).
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 37472-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 37472-2019
$205.00