Valid

GB/T 37455-2019Hydraulic ring-beam jacking system for offshore platform (English PDF)

海洋平台液压环梁升降装置

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 37455-2019 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

May 10, 2019

Implementation date

December 1, 2019

Scope

GB/T 37455-2019 is the English-translated version of 海洋平台液压环梁升降装置.

GB/T 37455-2019 is the Chinese standard "Hydraulic ring-beam jacking system for offshore platform".

Its scope clause reads: This standard specifies the classification, structure and marking, technical requirements, test methods, inspection rules, markings, packaging, transport and storage of hydraulic ring-beam jacking systems for offshore platforms (hereinafter referred to as jacking systems).

This standard applies to the design, manufacture, testing and acceptance of such jacking systems; ring-beam jacking systems used on other offshore engineering vessels may be dealt with by reference to this standard.

Found what you need?

Document preview — GB/T 37455-2019

National Standard of the People's Republic of China

ICS
47.020.99
Classification
U 35

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references

1 Scope

This standard specifies the classification, structure and marking, technical requirements, test methods, inspection rules, markings, packaging, transport and storage of hydraulic ring-beam jacking systems for offshore platforms (hereinafter referred to as jacking systems).

This standard applies to the design, manufacture, testing and acceptance of such jacking systems; ring-beam jacking systems used on other offshore engineering vessels may be dealt with by reference to this standard.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

GB/T 191 Packaging - Pictorial marking for handling of goods

GB/T 712 Structural steel for ships and marine engineering

GB/T 1184-1996 Geometrical tolerancing - Tolerance values for features without individual tolerance indications

GB/T 1800.1 Geometrical product specifications (GPS) - Limits and fits - Part 1: Bases of tolerances, deviations and fits

GB/T 1801 Geometrical product specifications (GPS) - Limits and fits - Selection of tolerance zones and fits

GB/T 1804-2000 General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications

GB/T 1958 Geometrical product specifications (GPS) - Geometrical tolerancing - Inspection and verification

GB/T 2970 Ultrasonic testing method for thick steel plates

GB/T 2975 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing

GB/T 3766 Hydraulic fluid power - General rules and safety requirements for systems and their components

GB/T 4208 Degrees of protection provided by enclosure (IP code)

GB/T 6388 Transport package shipping mark

GB/T 6402 Ultrasonic testing method for steel forgings

GB/T 6463 Metallic and other inorganic coatings - Review of methods of measurement of thickness

GB/T 9443 Penetrant testing of steel castings

GB/T 10610 Geometrical product specifications (GPS) - Surface texture - Profile method - Rules and procedures for the assessment of surface texture

GB/T 11345-2013 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels and assessment

GB/T 11352 Carbon steel castings for general engineering purposes

GB/T 13306 Plates

GB/T 13342 General technical conditions for marine reciprocating hydraulic cylinders

GB/T 17107 Structural steel grades and mechanical properties for forgings

GB/T 20066-2006 Steel and iron - Sampling and preparation of samples for the determination of chemical composition

GB/Z 24637.2 Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators and uncertainties

GB/T 25295 Electrical equipment - Guide to design for safety

GB/T 26952-2011 Non-destructive testing of welds - Magnetic particle testing of welds - Acceptance levels

GB/T 26953-2011 Non-destructive testing of welds - Penetrant testing of welds - Acceptance levels

What the standard covers

Beyond the scope and the normative references, the standard lays down the classification, the structure and marking, the technical requirements, the test methods, the inspection rules, and the provisions on markings, packaging, transport and storage of the jacking system. The clause numbering of those parts is given in the standard itself and is delivered in full with the English translation.

Foreword

This document was issued on 10 May 2019 by the State Administration for Market Regulation and the Standardization Administration of the People's Republic of China, and has been in force since 1 December 2019.

It is the first edition of this standard.

The document is under the responsibility of the Standardization Administration of China.

Classification: ICS 47.020.99, CCS U 35.

About this edition

GB/T 37455-2019 is the first edition of this standard. It was issued on 10 May 2019 and has been in force since 1 December 2019.

There is no earlier edition to compare it with, so a specification that has to refer to this subject can only cite GB/T 37455-2019 itself.

The interval between issue and effect is the transition period. It exists so that producers, laboratories and buyers can requalify products, revise procedures and use up documentation before the new text becomes the one that applies. The date on this page is the official one from the record of the Standardization Administration.

Edition history and citation

GB/T 37455-2019 is a first edition: there is no earlier version of this standard, so a document that needs to refer to this subject can only cite GB/T 37455-2019 itself.

Where an edition is replaced, the Chinese standardization system keeps the number and changes the year: the number identifies the subject, the year identifies the text. That is why a citation without a year is ambiguous and a citation with one is not.

Classification and status

GB/T 37455-2019 is classified under ICS 47.020.99, in the field of shipbuilding and marine structures. ICS is the International Classification for Standards, the same scheme used by ISO and by the national bodies of most countries, which is what allows a Chinese standard to be placed beside its foreign counterparts on subject rather than on number.

Its Chinese Standard Classification code is CCS U 35. CCS is the domestic scheme, a letter for the sector and two digits for the subject within it, and it is the code by which the standard is filed and searched in China.

The GB/T prefix marks a recommended national standard. It is not, in itself, law: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it. In practice that covers most of the cases in which it will be read — a purchase specification, an inspection agreement or a certification scheme.

The document is under the responsibility of the Standardization Administration of China, which is the body that maintains it and that will answer a formal question about its interpretation.

How this standard is designated

The full designation is GB/T 37455-2019. A citation should carry the number with its year, because the year identifies the text that applies.

In a catalogue or a filing system it is found under ICS 47.020.99 and CCS U 35 — the international classification and the Chinese one, which are the two codes by which a standard on this subject is searched.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 37455-2019

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 37455-2019

$235.00