Valid

GB/T 37450-2019Structural requirements for offshore cranes (English PDF)

海洋平台起重机结构要求

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 37450-2019 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

May 10, 2019

Implementation date

December 1, 2019

Scope

GB/T 37450-2019 is the English-translated version of 海洋平台起重机结构要求.

GB/T 37450-2019 is the Chinese standard "Structural requirements for offshore cranes". Its scope clause reads: This standard specifies the general requirements for the structure of offshore platform cranes (hereinafter referred to as cranes), materials, welding, high-strength bolting and Strength Check.

This standard applies to the design, manufacture and acceptance of offshore platform cranes. This standard does not apply to special types of cranes and hangers and/or emergency escape devices such as wave compensation. Its clauses include terms and definitions; symbol.

Found what you need?

Document preview — GB/T 37450-2019

National Standard of the People's Republic of China

ICS
47.020.50
Classification
U 42

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 symbol

1 Scope

This standard specifies the general requirements for the structure of offshore platform cranes (hereinafter referred to as cranes), materials, welding, high-strength bolting and

Strength Check.

This standard applies to the design, manufacture and acceptance of offshore platform cranes.

This standard does not apply to special types of cranes and hangers and/or emergency escape devices such as wave compensation.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 3811-2008 Crane design specification

GB/T 3893 Shipbuilding and offshore structures deck machinery terms and symbols

GB/T 5779.1 fastener surface defects bolts, screws and studs are generally required

GB/T 37443 general requirements for offshore platform cranes

Specification for lifting equipment for ships and offshore installations (China Classification Society)

Carbon steels and alloys - Determination of mechanical properties of fasteners - Part 1 . Bolts, screws and snails

Column coarse thread and fine thread (Mechanicalpropertiesoffastenersmadeofcarbonsteelandaloysteel-

Part 1.Bolts,screwsandstudswithspecifiedpropertyclasses-Coarsethreadandfinepitchthread)

ISO 4306-1 crane vocabulary Part 1. General (Cranes-Vocabulary-Part 1. General)

ISO 5817.2014 Welded joints of welded steel, nickel, titanium and their alloys (excluding electron beam welding)

[Welding-Fusion-weldedjointsinsteel,nickel,titaniumandtheiraloys(beamweldingexcluded)-

Qualitylevelsforimperfections]

APISpec2C-2012 Offshore Pedestal Crane Specification (Offshorepedestal-mountedcranes)

3 Terms and definitions

The terms and definitions defined in GB/T 3893, ISO 4306-1 and GB/T 37443 apply to this document.

4 symbol

The following symbols apply to this document.

n. safety factor;

beta. material yield ratio coefficient;

lambda. slenderness ratio;

sigma. normal stress in megapascals (MPa);

[sigma]. allowable stress in MPa (MPa);

sigmab. tensile strength of steel, in megapascals (MPa);

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 37450-2019

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 37450-2019

$145.00