GB/T 37371-2019Die casting units—Terminology (English PDF)
压铸单元 术语
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 37371-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
March 25, 2019
Implementation date
October 1, 2019
Scope
GB/T 37371-2019 is the English-translated version of 压铸单元 术语.
GB/T 37371-2019 is the Chinese standard "Die casting units—Terminology". Its scope clause reads: This standard defines the common terms and definitions of the functional devices and performance of high-pressure die casting units.
This standard applies to die casting units, for high-pressure casting. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 37371-2019
National Standard of the People's Republic of China
- ICS
- 25.120.30
- Classification
- J 61
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword3
- 1 Scope4
- 2 Terms and definitions4
- 2.1 Functional device4
- 2.1.1 Basic terminology4
- 2.1.2 Thermal insulation and pouring device6
- 2.1.3 Extractor and conveyor device6
- 2.1.4 Spraying device6
- 2.1.5 Die temperature control device7
- 2.1.6 Cleaning and rectification equipment7
- 2.1.7 Insert device7
- 2.1.8 Detection device8
- 2.1.9 System security device8
- 2.1.10 Filtration device9
- 2.1.11 Integrated control device9
- 2.1.12 Vacuum device10
- 2.1.13 Marking machine10
- 2.1.14 Others10
- 2.2 Performance10
- 2.2.1 Die casting machine10
- 2.2.2 Melt insulation and pouring device13
- 2.2.3 Extractor and conveyor device13
- 2.2.4 Spraying device14
- 2.2.5 Die temperature control device14
- 2.2.6 Detection device14
- 2.2.7 System safety device15
- 2.2.8 Integrated control device15
- 2.2.9 Vacuum device15
- 2.2.10 Others16
- References18
- Index19
1 Scope
This standard defines the common terms and definitions of the functional devices and performance of high-pressure die casting units.
This standard applies to die casting units, for high-pressure casting.
2 Terms and definitions
2.1 Functional device
2.1.1 Basic terminology
2.1.1.1 Die casting
The process, in which molten metal is press-injected into the mold AND kept under high pressure, until it is completely solidified.
2.1.1.2 Die casting machine
A power machine, that press-injects molten metal into a reusable mold, at high pressure and high speed.
2.1.1.3 Ancillary equipment
Functional equipment which supports the die-casting production.
Note: Ancillary equipment includes: pouring device, picking and conveying device, spraying device, die temperature control device, cleaning and rectification device, insert device, detection device, system security device, integrated control device, casting cooling device, vacuum device, etc.
2.1.1.4 Die casting unit
2.1.2 Thermal insulation and pouring device
2.1.2.1 Holding furnace
A device, which is used to store molten metal AND maintain a preset temperature.
2.1.2.2 Dosing furnace
A device, which is used to store molten metal AND has heat preservation, quantitative, pouring function.
2.1.2.3 Dosing and delivering material device; auto ladler
A device, that quantitatively takes molten metal from the holding furnace
AND transports it to the injection chamber.
2.1.3 Extractor and conveyor device
2.1.3.1 Extractor device; casting extractor
A machine, that grabs the die casting from the mold AND transports it to the designated location, before releasing it.
2.1.3.2 Pick-up fixture
A device, which is installed at the end of the manipulator, to grab die castings.
2.1.3.3 Conveyor
A device, that transports die castings to a designated location.
2.1.4 Spraying device
2.1.4.1 Spray system
2.1.10 Filtration device
2.1.10.1 Filtration device
A device, which is used to collect and process the oil mist, oil fume, waste water, dust particles, as produced by the die casting unit.
2.1.11 Integrated control device
2.1.11.1 Integrated control system
All the control devices and programs, which are needed to realize the process flow of the die casting unit.
2.1.11.2 Data acquisition
Data collection, which is carried out for the purpose of process monitoring and report generation.
[GB/T 15969.5-2002, definition 3.2]
2.1.11.3 Interlocked control
The control, which is realized by synchronizing the data exchange between two users. At different points of time, a user waits for other users to send out some data it expects.
[GB/T 15969.5-2002, definition 3.6]
2.1.11.4 Field bus
A digital, two-way transmission, multi-branch structure communication network, that connects intelligent field devices and automation systems.
2.1.12 Vacuum device
2.1.12.1 Vacuum device
A device, that quickly draws the gas in the cavity, to a predetermined degree of vacuum.
2.1.13 Marking machine
2.1.13.1 Marking machine
A device, which is used for marking bar codes, characters, patterns, etc. on the surface of castings.
2.1.14 Others
2.1.14.1 Cooling device; casting cooling
A device, that reduces the temperature of the casting to the temperature, which is required by the process.
2.2 Performance
2.2.1 Die casting machine
2.2.1.1 Most metal shot weight
The maximum mass of molten metal, that can be casted into the injection chamber, at one time.
[GB/T 21269-2018, definition 3.6]
2.2.1.2 Intensification
The use of accumulators, which have differential piston area or higher pressure, to make the fluid pressure in the injection cylinder higher than the system pressure.
2.2.1.11 Fast injection working pressure
In a hydraulic system, which has an accumulator, the set pressure of the fast injection accumulator.
[GB/T 21269-2018, definition 3.25]
2.2.1.12 Intensification pressure stationarity value
After the injection piston stops moving, the injection pressure which is set to elapse 200 ms.
[GB/T 21269-2018, definition 3.26]
2.2.2 Melt insulation and pouring device
2.2.2.1 Max pouring weight of metal pouring device
The mass of the molten metal, which is provided stably by the pouring equipment, at a single time.
2.2.2.2 Pouring accuracy
The error value of each pouring weight, as relative to the standard pouring weight.
2.2.2.3 Minimum pouring cycle time
The cycle time to complete one reclaiming, pouring, returning to the origin.
2.2.3 Extractor and conveyor device
2.2.3.1 Max load of extracting device
The maximum mass of die castings, which can be reliably taken out.
2.2.3.2 […]
2.2.7 System safety device
2.2.7.1 Redundancy
The product has more than one means to perform the same prescribed function.
Note: Rewrite GB/T 2900.99-2016, definition 2.10 192-10-02.
2.2.7.2 Reliability
The ability of a machine, its parts or devices, to perform a specified function, under specified conditions AND within a specified time interval.
[GB/T 15706-2012, definition 3.2]
2.2.8 Integrated control device
2.2.8.1 Storage capacity
The capacity of user program memory.
2.2.8.2 Extensibility
The extent to which the number of system I/O points, storage capacity, networking functions, various functional modules can be expanded.
2.2.8.3 Scanning speed
The speed at which the application is executed.
2.2.9 Vacuum device
2.2.9.1 Pumping rate
The ability of a vacuum pump, to pump-drain gas per unit time, under its working pressure.
2.2.9.2 Valve action time
The time FROM when the vacuum valve receives the command TO when the valve body is completely closed.
2.2.9.3 Vacuum pressure
The degree of gas thinning under vacuum.
2.2.10 Others
2.2.10.1 Cycle time of die cast cell
The time, which is required for the die casting unit, to perform an empty cycle, in a maneuvering sequence.
Note: One empty cycle time refers to the sum of the action time of mold closing, pouring, air injection, mold opening, ejection, extraction, spraying.
2.2.10.2 Mean operating time between failures; MTBF
The average working time, between two consecutive failures.
2.2.10.3 Capability machine index; CMK
The deviation of the mean value of the distribution, from the center value of the specification.
Note: It only considers the influence of the equipment itself.
2.2.10.4 Comprehensive energy consumption
The sum of physical quantities of various energy, which is actually consumed […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 37371-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 37371-2019
$235.00