GB/T 37363.3-2020Determination of biocides content of coating materials - Part 3:Determination of triclosan content (English PDF)
涂料中生物杀伤剂含量的测定 第3部分:三氯生含量的测定
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 37363.3-2020 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 19, 2020
Implementation date
October 1, 2021
Scope
GB/T 37363.3-2020 is the English-translated version of 涂料中生物杀伤剂含量的测定 第3部分:三氯生含量的测定.
GB/T 37363.3-2020 is the Chinese standard "Determination of biocides content of coating materials - Part 3:Determination of triclosan content". Its scope clause reads: This part of GB/T 37363 specifies the use of liquid chromatography and liquid chromatography-mass spectrometry/mass spectrometry to determine triclosan in paints.
(2,4,4'-Trichloro-2'-hydroxydiphenyl ether, CASNo.. 3380-34-5) Principle of content, reagents and materials, equipment, samples, test steps Steps, test data processing, detection limit, precision and test report.
This section applies to the determination of triclosan content in coatings. The determination of triclosan content in coating film and coating materials can also refer to this section. Its clauses include principle; reagents and materials.
Found what you need?
Document preview — GB/T 37363.3-2020
National Standard of the People's Republic of China
- ICS
- 87.040
- Classification
- G 50
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Principle
- 4 Reagents and materials
1 Scope
This part of GB/T 37363 specifies the use of liquid chromatography and liquid chromatography-mass spectrometry/mass spectrometry to determine triclosan in paints.
(2,4,4'-Trichloro-2'-hydroxydiphenyl ether, CASNo.. 3380-34-5) Principle of content, reagents and materials, equipment, samples, test steps
Steps, test data processing, detection limit, precision and test report.
This section applies to the determination of triclosan content in coatings. The determination of triclosan content in coating film and coating materials can also refer to this section.
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this document.
For undated references, the latest version (including all amendments) applies to this document.
GB/T 3186 Sampling of paints, varnishes and raw materials for paints and varnishes
GB/T 6682-2008 Analysis laboratory water specifications and test methods
GB/T 12806-2011 Laboratory glassware single mark volumetric flask
GB/T 12807-1991 Laboratory glass measuring pipette
GB/T 12808-2015 Laboratory glass instrument single mark pipette
3 Principle
Liquid chromatography. Use methanol as the extraction solvent to extract triclosan in the sample by a combination of ultrasonic extraction and centrifugal separation, and use liquid
Liquid chromatography (LC) is used for detection, qualitatively by retention time and quantified by external standard method.
Liquid chromatography-mass spectrometry/mass spectrometry. use methanol as the extraction solvent, and use a combination of ultrasonic extraction and centrifugal separation to extract the sample
The triclosan was detected by liquid chromatography-mass spectrometry/mass spectrometry (LC-MS/MS), qualitatively by retention time and selected ion, and quantified by external standard method.
Note 1.Other confirmed suitable solvents can also be selected as extraction solvents.
Note 2.Liquid chromatography in this section includes high performance liquid chromatography, ultra high performance liquid chromatography, etc.
4 Reagents and materials
Unless otherwise specified, only reagents of analytical purity and above are used in the analysis.
4.1 Triclosan
The mass fraction is not less than 98%, or the purity is known.
4.2 Methanol
chromatographically pure.
4.3 Ammonium acetate
chromatographically pure.
4.4 Standard stock solution
about.200µg/mL, weigh about 0.02g of triclosan (4.1), accurate to 0.1mg, and place it in a 100mL volumetric flask (5.6), dilute to the mark with methanol (4.2). The standard stock solution is stored under 4°C and protected from light, and the validity period is 30d.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 37363.3-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 37363.4-2020 — Determination of biocides content of coating materials - Part 4: Determination of carbendazim content
GB/T 37363.2-2019 — Determination of biocides content of coating materials—Part 2: Determination of diuron content
GB/T 37363.1-2019 — Determination of biocides content of coating materials—Part 1:Determination of isothiazolinones content
GB/T 37363.3-2020
$135.00