GB/T 37358-2019Friction pendulum isolation bearings for buildings (English PDF)
建筑摩擦摆隔震支座
This is a limited preview
Buy now to download the full PDF (20 pages)
Need quotation for your management?
Get a formal quotation for GB/T 37358-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
March 25, 2019
Implementation date
February 1, 2020
Scope
GB/T 37358-2019 is the English-translated version of 建筑摩擦摆隔震支座.
GB/T 37358-2019 is the Chinese standard "Friction pendulum isolation bearings for buildings".
Its scope clause reads: This standard specifies the terms and definitions of building friction pendulum isolation bearings, classification, specifications, marking, general requirements, requirements, test methods, inspection Inspection rules, marking, packaging, transportation and storage.
This standard applies to the friction pendulum isolation bearings used in the construction and structure of structures. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 37358-2019
National Standard of the People's Republic of China
- ICS
- 91.120.25
- Classification
- P 15
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Classification, specifications, markings
- 5 General requirements
- 6 requirement
- 7 Test method
- 8 Inspection rules
- 9 Marking, packaging, transport and storage
- Appendix A (informative) Technical parameters of bearing isolation performance
- Appendix B (normative appendix) Friction material wire wear test method
- Appendix C (Normative) Test Method for Creep Compression Deformation of Friction Materials
- Appendix D (normative appendix) Vertical bearing capacity test method
- Appendix E (Normative Appendix) Test Method for Horizontal Performance of Finished Bearings
1 Scope
This standard specifies the terms and definitions of building friction pendulum isolation bearings, classification, specifications, marking, general requirements, requirements, test methods, inspection
Inspection rules, marking, packaging, transportation and storage.
This standard applies to the friction pendulum isolation bearings used in the construction and structure of structures.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only the dated version applies to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 528 Determination of tensile stress-strain properties of vulcanized rubber or thermoplastic rubber
GB/T 699 high quality carbon structural steel
GB/T 700 carbon structural steel
GB/T 819.2 Cross recessed countersunk screws - Part 2. 8.8, stainless steel and non-ferrous metal screws
Plastics -- Determination of density of non-foam plastics -- Part 1 . Dipping method, liquid pycnometer method and titration method
Determination of tensile properties of plastics - Part 3. Test conditions for films and sheets
GB/T 1184 Shape and position tolerances without tolerance values
GB/T 1591 low alloy high strength structural steel
GB/T 1682 vulcanized rubber - Determination of low temperature brittleness - Single sample method
GB/T 1804 General tolerances Tolerances for linear and angular dimensions without tolerances
GB/T 3077 alloy structural steel
GB/T 3280 stainless steel cold rolled steel plate and strip
GB/T 3398.1 Determination of hardness of plastics - Part 1
GB/T 3512 vulcanized rubber or thermoplastic rubber hot air accelerated aging and heat test
GB/T 6031 Determination of hardness of vulcanized rubber or thermoplastic rubber (10IRHD~100IRHD)
GB/T 7233.1 Ultrasonic testing of steel castings - Part 1. General purpose steel castings
GB/T 7760 vulcanized rubber or thermoplastic rubber - Determination of bond strength
Static tensile test of GB/T 7762 vulcanized rubber or thermoplastic rubber resistant to ozone cracking
GB/T 11352 casting carbon steel for general engineering
GB/T 11379 metal coating for chrome plating
GB/T 20688.1 Isolation bearings - Part 1. Test methods for isolated rubber bearings
JB/T 5943 General technical conditions for welding parts of construction machinery
Technical requirements for TB/T 1527 railway steel bridge protection coating and coating supply
3 Terms and definitions
The following terms and definitions apply to this document.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.
Similar standards
How to Download GB/T 37358-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 37358-2019
$355.00