GB/T 37357-2019Cast iron pipes, fittings and accessories for rain drainage of building roof (English PDF)
建筑屋面雨水排水铸铁管、管件及附件
This is a limited preview
Buy now to download the full PDF (48 pages)
Need quotation for your management?
Get a formal quotation for GB/T 37357-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
March 25, 2019
Implementation date
February 1, 2020
Scope
GB/T 37357-2019 is the English-translated version of 建筑屋面雨水排水铸铁管、管件及附件.
GB/T 37357-2019 is the Chinese standard "Cast iron pipes, fittings and accessories for rain drainage of building roof".
Its scope clause reads: This standard specifies the terms and definitions, classification and model, size, shape and weight of cast iron pipes, fittings and accessories for building roof rainwater drainage, and allowable deviations, technical requirements, test methods, inspection rules, packaging, marking, quality certificates, transportation and storage.
This standard is applicable to cast iron pipes, fittings and accessories for rainwater drainage of building roofs. It is also applicable to construction sewage drainage, wastewater drainage and casting.
Cast iron pipes, fittings and accessories for the drainage of industrial pipes without corrosive iron pipes.
Found what you need?
Document preview — GB/T 37357-2019
National Standard of the People's Republic of China
- ICS
- 23.040.10
- Classification
- H 48
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Classification and Model
- 5 size, shape, weight and tolerance
- 6 Technical requirements
- 7 Test method
- 8 Inspection rules
- 9 Packaging, marking, quality certificate, transportation and storage
- Appendix A (Normative) Pipe fittings
- Appendix B (Normative) Cast iron rain bucket and cast iron rain bucket
- Appendix C (Normative) Flange gland, inspection port gland, fastening bolt, support ring and retaining ring
- Appendix D (Normative) Rubber Seals
- Appendix E (Normative Appendix) Fixed Pipe Cards and Elevators
1 Scope
This standard specifies the terms and definitions, classification and model, size, shape and weight of cast iron pipes, fittings and accessories for building roof rainwater drainage.
And allowable deviations, technical requirements, test methods, inspection rules, packaging, marking, quality certificates, transportation and storage.
This standard is applicable to cast iron pipes, fittings and accessories for rainwater drainage of building roofs. It is also applicable to construction sewage drainage, wastewater drainage and casting.
Cast iron pipes, fittings and accessories for the drainage of industrial pipes without corrosive iron pipes.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 12 round head square neck bolt
GB/T 223.59 Determination of phosphorus content of steels and alloys - phosphine molybdenum blue spectrophotometric method and bismuth phosphomolybdenum blue spectrophotometric method
GB/T 223.68 Steel and alloy chemical analysis method - Determination of sulfur content by potassium iodate titration after combustion in tubular furnace
GB/T 223.72 Determination of sulfur content of steel and alloys - Gravimetric method
GB/T 228.1 tensile testing of metallic materials - Part 1
GB/T 231.1 Brinell hardness test for metallic materials - Part 1. Test methods
GB/T 528 Determination of tensile stress-strain properties of vulcanized rubber or thermoplastic rubber
GB/T 1690 vulcanized rubber or thermoplastic rubber liquid test method
GB/T 3098.1 Fastener mechanical properties bolts, screws and studs
GB/T 3098.6 Mechanical properties of fasteners Stainless steel bolts, screws and studs
GB/T 3512 vulcanized rubber or thermoplastic rubber hot air accelerated aging and heat test
GB/T 4336 Determination of multi-element content of carbon steel and medium-low alloy steels by spark discharge atomic emission spectrometry (conventional method)
GB/T 5782 Hex Head Bolt
GB/T 6031 Determination of hardness of vulcanized rubber or thermoplastic rubber (10IRHD~100IRHD)
Rubber and rubber -- Determination of compression set - Part 1 . normal temperature and temperature conditions
Rubber and rubber products -- Determination of compression set - Part 2. Under low temperature conditions
Static tensile test of GB/T 7762 vulcanized rubber or thermoplastic rubber resistant to ozone cracking
GB/T 9439 gray iron castings
GB/T 9799-2011 Metallic and other inorganic coatings of treated zinc plating on steel
GB/T 10044 cast iron welding rod and welding wire
GB/T 12772-2016 Flexible interface cast iron pipe, fittings and accessories for drainage
GB/T 13295-2013 Ductile iron pipes, fittings and accessories for water and gas
GB/T 13452.2-2008 Determination of film thickness of paints and varnishes
GB/T 16776 silicone structural sealant for construction
GB/T 18593 Anti-corrosion coating of fusion bonded epoxy powder coating
GB/T 20878 Stainless steel and heat resistant steel grades and chemical composition
GB/T 26081-2010 Ductile iron pipes, fittings and accessories for sewage […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 48 pages — is available in the English PDF.
Similar standards
How to Download GB/T 37357-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 37357-2019
$770.00