GB/T 37307-2019Design requirements of offshore helicopter decks (English PDF)
海洋平台用直升机甲板设计要求
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 37307-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
March 25, 2019
Implementation date
October 1, 2019
Scope
GB/T 37307-2019 is the English-translated version of 海洋平台用直升机甲板设计要求.
GB/T 37307-2019 is the Chinese standard "Design requirements of offshore helicopter decks".
Its scope clause reads: This standard specifies the terms and definitions of the helicopter deck for offshore platforms, structural classification and material selection, design loads and design conditions, Structural design requirements, helicopter deck layout, etc. This standard applies to the design of helicopter decks for steel or aluminum offshore platforms. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 37307-2019
National Standard of the People's Republic of China
- ICS
- 47.020.99
- Classification
- U 17
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Main component primary member
- 3.2 Secondary member
- 3.3 Special component specificmember
- 3.4 Helicopter maximum size largestdimensionofthehelicopter;LD
- 3.5 Obstacle obstruct
- 3.6 Landing area/takeoff area
1 Scope
This standard specifies the terms and definitions of the helicopter deck for offshore platforms, structural classification and material selection, design loads and design conditions,
Structural design requirements, helicopter deck layout, etc.
This standard applies to the design of helicopter decks for steel or aluminum offshore platforms.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only the dated version applies to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 712 structural steel for marine and offshore engineering
GB 50429-2007 Aluminum alloy structural design specification
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Main component primary member
A component that plays an important role in the overall integrity of the platform structure.
Note. For example, the main support members of the helicopter deck.
3.2 Secondary member
Non-primary components whose failure does not affect the overall integrity of the platform structure.
Note. For example, a helicopter deck.
3.3 Special component specificmember
The main components at critical load transfer points and stress concentrations.
Note. For example, a "through" member where the platform is connected to other structures.
3.4 Helicopter maximum size largestdimensionofthehelicopter;LD
When the helicopter rotor rotates, from the front end of the wing tip trajectory plane of the main rotor to the wing tip trajectory plane of the tail rotor or the last of the helicopter structure
The maximum size measured at the end.
3.5 Obstacle obstruct
Any object located in the operating area of the helicopter deck, or extended to a defined surface defined to protect the helicopter in flight
Any object or part of an object.
3.6 Landing area/takeoff area
A site for helicopters to land and take off on a floating or fixed building at sea.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 37307-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 37307-2019
$235.00