Valid

GB/T 37240-2018Test and evaluation methods for light transmission property of cover glass for crystalline silicon photovoltaic module (English PDF)

晶体硅光伏组件盖板玻璃透光性能测试评价方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 37240-2018 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 28, 2018

Implementation date

July 1, 2019

Scope

GB/T 37240-2018 is the English-translated version of 晶体硅光伏组件盖板玻璃透光性能测试评价方法.

GB/T 37240-2018 is the Chinese national method for measuring and rating how much light the cover glass of a crystalline silicon photovoltaic module lets through.

It defines two quantities: the photovoltaic transmittance, the direct transmittance of sunlight between 380 nm and 1100 nm, and the photovoltaic characteristic transmittance, restricted to the 500 nm to 900 nm band where crystalline silicon cells respond most.

It sets the test conditions, from the instrument with monochromator, photodetector and integrating sphere and its wavelength and photometric accuracy to the laboratory temperature, humidity and sample conditioning, and then the test procedure, the parameter calculations, the rating of light transmission and the test report.

It applies to cover glass for crystalline silicon modules, and other photovoltaic glass may refer to it. It was issued on 28 December 2018 and has applied since 1 July 2019.

Found what you need?

Document preview — GB/T 37240-2018

National Standard of the People's Republic of China

ICS
81.040.30
Classification
Q 37

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Terms and definitions
  • 3 Test conditions

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

1 Scope

This standard specifies the test conditions, test procedures, parameter calculations, and light transmission properties of the translucent performance test of the crystalline silicon photovoltaic module cover glass. Evaluation rating and test report.

This standard is applicable to cover glass for crystalline silicon photovoltaic modules. Other glass for photovoltaic modules can also refer to this standard.

2 Terms and definitions

The following terms and definitions apply to this document.

2.1 Photovoltaic transmittance

The direct transmittance of sunlight in the response range of the crystalline silicon photovoltaic cell in the range of 380 nm to 1100 nm.

2.2 Photovoltaic characteristic transmittance

The direct transmittance of sunlight in a specific wavelength range of 500 nm to 900 nm with a high spectral response in a crystalline silicon photovoltaic cell.

3 Test conditions

3.1 Instrument

3.1.1 The instrument shall contain the following parts.

--- Stable light source system;

--- Monochromator;

--- A system capable of producing parallel light of the same wavelength and intensity;

---Photodetector;

---Integral ball.

3.1.2 The wavelength range of the instrument should include 380nm~1100nm.

3.1.3 The wavelength accuracy of the instrument does not exceed 1 nm.

3.1.4 The photometric accuracy of the instrument should not exceed 1%, and the repeatability should not exceed 0.5%.

3.1.5 The angle between the optical axis of the illumination beam and the normal of the sample surface does not exceed 10°, and the angle between any light in the illumination beam and the optical axis does not exceed 3°. The spot that strikes the surface of the sample should cover more than 10 micropattern cycles.

3.1.6 It is advisable to use an integrating sphere of not less than 150 mm. The sum of the areas of the opening of the integrating sphere should be less than 4% of the internal surface area of the integrating sphere.

3.1.7 The distance between the sample and the integrating sphere entrance is not more than 2mm.

3.2 Test environment

The test temperature should be in the range of 18 ° C ~ 28 ° C, the relative humidity should be less than 70%, should be away from vibration. Sample conditioning time before test Not less than 2h.

3.3 Sample

Test the product as a sample or a sample of 300mm×300mm with the same raw materials and the same process conditions as the product.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 37240-2018

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 37240-2018

$150.00