Valid

GB/T 36990-2018Classification of automotive service lubricating greases (English PDF)

车用润滑脂分类

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 36990-2018 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 28, 2018

Implementation date

July 1, 2019

Scope

GB/T 36990-2018 is the English-translated version of 车用润滑脂分类.

GB/T 36990-2018 sets out how the lubricating greases used on motor vehicles are classified. It applies to greases for automotive chassis, hub bearings and automotive accessories, grouped by their main application on the vehicle.

Each type is identified by a code of capital letters, such as GC for hub bearings, GC-LB for universal chassis and hub bearing greases and PR for accessory bearings like alternator, clutch release, water pump and belt tensioner bearings.

For each code the standard describes the vehicles and load conditions it suits, the expected grease performance, the operating temperature range and the recommended consistency grade, and an informative appendix relates load to vehicle operating conditions. It was issued on 28 December 2018 and has applied since 1 July 2019.

Found what you need?

Document preview — GB/T 36990-2018

National Standard of the People's Republic of China

ICS
75.100
Classification
E 36

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword3
  • 1 Scope4
  • 2 Code Description4
  • 3 Specific Classification5
  • Appendix A (Informative) Relations between Load and Automotive Operational Condition8
  • References9

Foreword

This Standard was drafted in accordance with the rules in GB/T 1.1-2009.

1 Scope

This Standard specifies the classification of automotive service lubricating greases.

This Standard is applicable to lubricating greases for automotive chassis, hub bearing and automotive accessories.

2 Code Description

2.1 The classification of automotive service lubricating greases is determined in accordance with the product classification requested by main application occasions of lubricating greases on automotive.

2.2 Each type of automotive service lubricating greases shall be represented by a code constituted of a group of capitalized English letters. Please refer to Table 1 for the meaning of the letters. […]

3 Specific Classification

GC: Applicable to hub bearings of passenger vehicles, commercial vehicles and other vehicles operated under intermediate to heavy load. If bearing temperature is relatively high, heavy load shall be considered. The operation of this type of vehicles is as follows.

Frequent starts-stops (such as buses, taxies and urban police cars, etc.) or strong braking (such as trailers, heavy-loaded vehicles and other vehicles operated in mountainous areas, etc.)

This type of lubricating greases has resistance of oxidation, evaporation and thinning consistence.

It can prevent bearings from corrosion and abrasion; it also has satisfying rubber compatibility.

Operating temperature range shall be -40 °C ~ 160 °C, and it will occasionally reach 200 °C;

Generally speaking, lubricating greases with 2# consistence are recommended; lubricating greases with 1# or 3 # consistence can also be adopted.

Universal Lubricating Greases for Chassis and Hub Bearing

GC-LB: Applicable to buses, taxies and urban police cars, trailers, heavy-loaded vehicles, and passenger vehicles, trucks and other vehicles operated in mountainous areas under intermediate to heavy load.

The performance of this type of lubricating greases can simultaneously reach the performance of lubricating greases for Category-LB chassis and Category-GC hub bearings.

Lubricating Greases for Automotive Accessories

PR: Applicable to rotatory bearings, such as alternator bearings, clutch release bearings, electromagnetic clutch bearings for air conditioners, water pump bearings and engine belt tensioner bearings.

This type of lubricating greases has a long service life and low noise emission; resistance to abrasion and rust; it satisfies variable-speed operation at an extremely high accelerated speed; Operating temperature range shall be -40 °C ~ 180 °C; Maximum rotating speed can reach 18,000 r/min;

Generally speaking, lubricating greases with 2# consistence are recommended; lubricating greases with other grades of consistence can also be adopted.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 36990-2018

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 36990-2018

$95.00