GB/T 36920-2018Locksets-Terminology (English PDF)
锁具 术语
This is a limited preview
Buy now to download the full PDF (34 pages)
Need quotation for your management?
Get a formal quotation for GB/T 36920-2018 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 28, 2018
Implementation date
July 1, 2019
Scope
GB/T 36920-2018 is the English-translated version of 锁具 术语.
GB/T 36920-2018 sets the general terms and definitions used for locks, so that the same product is no longer named differently by different regions and manufacturers.
It applies to civil locks. The terms are grouped in four chapters, on lock products, main lock components, lock performance and other terms, and are followed by an index.
Product terms include the lock and the lockset, the padlock and its kinds, such as pin tumbler, blade, combination and laminated padlocks, and padlocks opened from the bottom, from the side or by pushing upwards.
The introduction presents it as the basic terminology standard of the lock industry, meant to ease communication in research, production and use. It was issued on 28 December 2018 and has applied since 1 July 2019.
Found what you need?
Document preview — GB/T 36920-2018
National Standard of the People's Republic of China
- ICS
- 97.180
- Classification
- Y 73
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- Introduction
- 1 Scope
- 2 Lock product terminology
- 3 Lock main components term
- 4 Lock performance terminology
- 5 Locks other terms
- Reference
- Index
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
Introduction
In recent years, China's lock industry has developed rapidly, and is in the critical period of using the new technology and information technology to transform the traditional lock industry.
There are a large number of professional terminology in terms of structure, classification, parts, performance, etc., but the naming and definition of the lock industry in this respect is quite confusing.
The same products are called differently in different regions and different enterprises, resulting in difficulties in communication, research, production and use. In response to the lock The rapid growth and high-speed dissemination of the language has a very obvious practical significance.
This standard is the basic general standard for the lock industry and an important part of the work of standardizing the basic field of lock industry.
This standard is based on the development, design, production requirements and consumer habits of lock products, and the terms and definitions are standardized.
1 Scope
This standard defines the general terms and definitions of locks.
This standard applies to civil locks.
2 Lock product terminology
2.1 Lock
A device with a locking function for safety and prevention.
2.2 Lockset
A general term for various lock types.
2.3 Padlock
Lock the lock of the object (body) in a hanging form. [GB 21556-2008, definition 3.16]
2.4 Pin key padlock
Block the movable part as a padlock of the marble (2.3).
2.5 Blade padlock
Block the movable part as a blade padlock (2.3).
2.6 Cipher-coded padlock
A padlock with a digitally encoded structure that is open (2.3).
2.7 Laminated padlock
The lock body is a padlock (2.3) made up of several sheet-like parts.
2.8 Bottom operate padlock
Insert the key from the keyhole at the bottom of the lock body into the open padlock (2.3).
2.9 Lateral operate padlock
Insert the key from the keyhole on the side of the lock body into the open padlock (2.3).
2.10 Pushing opening padlock
The key is inserted from the keyhole at the bottom of the lock body and then opened upwards and rotates the open padlock (2.3).
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 34 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 36920-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 36920-2018
$510.00