GB/T 36787-2018Pulp molding tableware (English PDF)

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

1 Scope

This standard specifies the terms and definitions, classification, requirements, test methods, inspection rules, marking, packaging, transportation and storage.

This standard applies to paper tableware made by the process of molding, molding, drying, etc., including molded paper cups, molded paper bowls, molded paper meal boxes, molded paper trays, molded paper plates, molded paper trays, and the like.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 462 Determination of moisture in paper, paperboard and pulp analysis samples

GB/T 2828.1. Sampling and sampling procedures - Part 1. Batch-to-batch sampling plan searched by the acceptance quality limit (AQL)

GB 4806.1 National food safety standards General requirements for food contact materials and products

GB 4806.8 National Food Safety Standard Food Contact Paper and Paperboard Materials and Products

Standard atmospheric conditions for the handling and testing of GB/T 10739 paper, board and pulp samples

GB/T 27590-2011 paper cup

QB/T 5051 Mould for paper tableware

3 Terms and definitions

The following terms and definitions apply to this document.

4 Classification

Pulp molded tableware is divided into molded paper cups, molded paper bowls, molded paper lunch boxes, molded paper trays, molded paper plates, molded paper trays and the like according to the use.

5 Requirements

5.1 The technical specifications of pulp molded tableware should meet the requirements of Table 1.