Valid

GB/T 36666-2018Guidelines for underwater ship cleaning (English PDF)

船舶水下清洗指南

Preview PDF

This is a limited preview

Buy now to download the full PDF (17 pages)

Need quotation for your management?

Get a formal quotation for GB/T 36666-2018 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

September 17, 2018

Implementation date

April 1, 2019

Scope

GB/T 36666-2018 is the English-translated version of 船舶水下清洗指南.

GB/T 36666-2018 gives guidance on cleaning the underwater hull of seagoing ships.

It classifies hull fouling - soft fouling such as slime and seaweed, hard fouling such as barnacles, tubeworms and calcareous deposits - and grades the hull surface fouling (FR) and the damage to the anti-fouling coating (PDR), together with the fouling areas of the hull.

It then covers the pre-cleaning survey and assessment, the cleaning procedure and plan, data acquisition with image recording and site reports, the cleaning methods, acceptance criteria for the cleaned hull and cleaning tools, with informative annexes giving model inspection and acceptance reports.

It is meant for underwater cleaning companies and can also guide work on drilling platforms, bridge terminals and nuclear power plants. It was issued on 17 September 2018 and has applied since 1 April 2019.

Found what you need?

Document preview — GB/T 36666-2018

National Standard of the People's Republic of China

ICS
47.020.99
Classification
U 04

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Terms and Definitions
  • 3 Hull pollution classification
  • 3.1 Hull pollution taxonomy
  • 3.2 Hull surface pollution level (FR)
  • 3.3 Anti-fouling coating damage degree (PDR) classification
  • 3.4 Hull pollution biological area
  • 4 Cleaning Investigative Assessment
  • 5 cleaning procedures
  • 5.1 Ship survey, data collection, cleaning assessment
  • 5.2 Formulation of cleaning construction plan
  • 5.3 Cleaning
  • 5.4 Data Recording and Inspection
  • 6 Data Acquisition
  • 6.1 Record Content
  • 6.2 Image Recording
  • 6.3 Underwater Recording Site Report
  • 7 Cleaning method
  • 7.1 Preparation
  • 7.2 Front hull inspection
  • 7.3 Hull cleaning
  • 8 Hull surface cleaning, acceptance criteria
  • 9 cleaning tools
  • Appendix A (informative) Pre-cleaning inspection report
  • Appendix B (informative) Ship hull acceptance assessment report
  • Appendix C (informative) Cleaning tools

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

1 Scope

This standard stipulates the working process of underwater cleaning of marine vessels, including the biological classification of hull underwater pollution, cleaning and inspecting assessment, and clearing Washing procedures, data collection, hull surface cleaning and acceptance criteria.

This standard is applicable to the underwater inspection and cleaning and acceptance of marine vessels by marine underwater cleaning enterprises, and can be used to guide oil drilling. Underwater inspection, cleaning and acceptance of equipment and facilities such as Taiwan, bridge terminals and nuclear power plants.

2 Terms and definitions

The following terms and definitions apply to this document.

2.1 Marine pollution organism

Marine life attached to some underwater equipment and facilities.

Note: Contaminated organisms are divided into three types. software, hardware and complex.

2.2 Soft-contaminated organism

Sludge and seaweed attached to equipment and facilities in the water.

2.3 Sludge

Marine microorganisms are attached to the primary stage of the hull.

Note: The first step of the pollution process is the formation of sludge, immersed in the surface of the object in the seawater, will quickly form a layer of sludge containing bacteria, fungi, original Raw animals and seaweed. The surface of the wet object will adhere to bacteria and polluting organisms within 1 hour, forming a smooth sludge layer on the surface of the object.

2.4 Seaweed and other algae

A single plant or a long series of simple plants attached to the reef, various parts of the hull and other solid structures in the water.

2.5 Hard-contaminated organism

Contaminated organisms such as barnacles, tubular worms and calcium carbonate deposits.

2.6 Barnacles

A cluster of grayish-white, marine organisms with a calcareous outer shell attached to the object.

Note: There is usually a conical hard shell with a jagged top.

2.7 Tubular worm

Usually one of the upper ends formed along the hull is a red meat head and the lower end is a long, straight white tubular creature.

2.8 Calcium carbonate deposits

It is deposited from the exposed metal surface of magnesium and calcium carbonate in water.

Note: There is a strong adhesion, especially on the bare metal surface of the propeller, it is easy to form a uniform calcium carbonate deposit.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.

Similar standards

How to Download GB/T 36666-2018

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
17 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 36666-2018

$295.00