Valid

GB/T 36480-2018Information technology—General specification for compact embeded cameras (English PDF)

信息技术紧缩嵌入式摄像头通用规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (32 pages)

Need quotation for your management?

Get a formal quotation for GB/T 36480-2018 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

June 7, 2018

Implementation date

January 1, 2019

Scope

GB/T 36480-2018 is the English-translated version of 信息技术紧缩嵌入式摄像头通用规范.

GB/T 36480-2018 is the general specification for compact embedded cameras, devices that combine at least a lens, an area array image sensor and a signal processing unit to output an image signal.

It defines terms such as image sensor, pixel and optically effective pixels, classifies the products and sets out their requirements and test methods, with normative annexes on test conditions, equipment and test charts and on failure criteria.

It also covers quality assessment procedures and marking, packaging, transport and storage. Its references include national standards on environmental testing, sampling, enclosure protection (IP code), radio disturbance, immunity and restricted substances in electrical and electronic products.

It applies to all kinds of compact embedded cameras, and was issued on 7 June 2018 and has applied since 1 January 2019.

Found what you need?

Document preview — GB/T 36480-2018

National Standard of the People's Republic of China

ICS: 35.180
Classification: L 63

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Foreword
1 Scope
2 Normative references
3 Terms and Definitions
4 Abbreviations
5 Category
6 Requirements
7 Test Method
8 Quality assessment procedures
9 Marking, packaging, transportation, storage
Appendix A (Normative) Test Conditions and Equipment and Test Chart Card
Appendix B (Normative Appendix) Failure Criterion

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

1 Scope

This standard specifies the requirements, test methods, quality assessment procedures, marking, packaging, transportation and storage of embedded compact cameras.

This standard applies to all kinds of compact embedded cameras (hereinafter referred to as "products").

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 191 packaging storage and transportation icon

GB/T 2423.1 Environmental testing of electrical and electronic products - Part 2. Test methods Test A. Low temperature

GB/T 2423.2 Environmental testing of electric and electronic products - Part 2. Test method Test B. High temperature

GB/T 2423.3 Environmental testing - Part 2. Test method test Cab. constant damp heat test

GB/T 2423.10 Environmental testing of electric and electronic products - Part 2. Test method test Fc. Vibration (sinusoidal)

GB/T 2828.1. Sampling and sampling procedures - Part 1. Batch-to-batch sampling plan searched by the acceptance quality limit (AQL)

GB/T 4208 enclosure protection grade (IP code)

GB/T 4857.5 packaging and transportation package drop test method

GB/T 9254-2008 Radio disturbance limits and measurement methods for information technology equipment (including amendments 1)

GB/T 17618 Information technology equipment immunity limits and methods of measurement

GB/T 26125 Determination of six restricted substances (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls and polybrominated diphenyl ethers)

GB/T 26572 Limit requirements for restricted substances in electrical and electronic products

3 Terms and definitions

The following terms and definitions apply to this document.

3.1 Compact embedded camera

At least the lens, the area array image sensor and the signal processing unit are configured to complete the output image signal.

3.2 Image sensor

The optical image information can be converted into a component of the digital electrical signal output.

3.3 Pixel

A physical unit that can be imaged separately on an image sensor.

3.4 Total optically effective pixels

The image sensor can receive the optical signal from the lens and can be reflected by the data of the still image output by the shooting device. The number of pixels.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 32 pages — is available in the English PDF.

Referenced standards

Normative references

GB/T 9254-2008 · GB/T 17618

Cited by

SF/T 0081-2020Smart correction overall technical specifications

Similar standards

GB 47372-2026|GB/T 34980.1-2026|GB/T 45693-2025|GB/T 46070-2025|GB/T 44864-2024|GB/T 43152-2023

How to Download GB/T 36480-2018

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.