GB/T 36410.5-2018Energy consumption evaluation methods of port equipment—Part 5: Port tractor (English PDF)
港口设备能源消耗评价方法 第5部分：港口牵引车
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 36410.5-2018 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
June 7, 2018
Implementation date
January 1, 2019
Scope
GB/T 36410.5-2018 is the English-translated version of 港口设备能源消耗评价方法 第5部分：港口牵引车.
GB/T 36410.5-2018 sets out how to test and rate the energy consumption of port tractors, the semi-trailer tractors that move containers inside a port.
It is Part 5 of the GB/T 36410 series on the energy consumption of port equipment, whose other parts cover shore container cranes, rail-mounted container gantry cranes, grab ship unloaders and continuous ship loaders.
It fixes the test conditions, with a dry road, limited wind, an ambient temperature between 5 °C and 26 °C, and a looped test road, the requirements for the tractor under test, the test method and the evaluation method, using fuel consumption per kilometre and unit fuel consumption.
Its annexes give the energy efficiency test report and the energy efficiency levels. It applies to fuel-powered container tractors, was issued on 7 June 2018 and has applied since 1 January 2019.
Found what you need?
Document preview — GB/T 36410.5-2018
National Standard of the People's Republic of China
- ICS
- 53.060; 03.220.40
- Classification
- R 46
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Testing Requirements
- 5 Test Method
- 6 Evaluation Method
- Appendix A (Normative Appendix) Port Traction Energy Efficiency Test Report
- Appendix B (Normative Appendix) Port Tractor Energy Efficiency Level
Foreword
GB/T 36410 "Evaluation Method for Energy Consumption of Port Equipment" is divided into 5 parts.
--- Part 1. Shore container cranes;
--- Part 2. Rail-mounted container gantry cranes;
--- Part 3. Bridge Grab Ship Unloader;
--- Part 4. Continuous cargo shippers;
--- Part 5. Harbor tractors.
This part is Part 5 of GB/T 36410.
This section was drafted in accordance with the rules given in GB/T 1.1-2009.
1 Scope
This part of GB/T 36410 specifies the energy consumption detection requirements, detection methods, and evaluation methods of the port tractors.
This section applies to the evaluation of energy consumption of semi-trailer towing vehicles for transport containers using fuel oil as energy, other types of fuel oil For energy tractors can also refer to use.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest version (including all amendments) applies to this document.
GB/T 36410.1 Method for evaluating the energy consumption of port facilities Part 1. Shore container cranes
JT/T 880 port tractor
JT/T 1056 Port Tractor Safety Regulations
3 Terms and Definitions
The terms and definitions defined in GB/T 36410.1 and the following apply to this document.
3.1 Fuel consumption per kilometer
The average fuel consumption per kilometer when the tractor is driving.
3.2 Unit fuel consumption
The ratio of fuel consumption per kilometer to hauling mass under test conditions.
4 Testing requirements
4.1 Basic requirements
4.1.1 If there is no rain or snow test, the road should be dry and the road surface can have wet marks, but there should be no accumulation of water.
4.1.2 The average wind speed should not exceed 5 levels.
4.1.3 The ambient temperature should be between 5 °C ~ 26 °C. The maximum relative humidity should not exceed 95%.
4.1.4 The longitudinal slope between any two points on the test road should not exceed 2%.
4.1.5 The measured road section of the test is a circular road section, which is divided into the forward lane and the reverse lane. The straight length of the one-way lane should not be less than 500m. The distance between the lane and the reverse lane is 40m.
4.2 Tested tractor requirements
4.2.1 The normal operation of the port tractor (referred to as a tow truck) shall comply with the relevant requirements of JT/T 880 and JT/T 1056 and must not be used to increase energy.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 36410.5-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 36410.1-2018 — Energy consumption evaluation methods of port equipment—Part 1:Quayside container crane
JT/T 1056-2016 — Safety rules for port tractor
JT/T 880-2024 — Port tractor
Secure payment via Stripe
Payments accepted
GB/T 36410.5-2018
$145.00