GB/T 36124-2018Model coding rules and identification number of child restraint system (English PDF)
机动车用儿童约束系统产品型号编制规则及识别代号
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 36124-2018 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
May 14, 2018
Implementation date
December 1, 2018
Scope
GB/T 36124-2018 is the English-translated version of 机动车用儿童约束系统产品型号编制规则及识别代号.
GB/T 36124-2018 sets the rules for the production model and the product identification number of child restraint systems used in power-driven vehicles sold in China.
It explains how the production model is built from a company code, a product design code and a modification code, with an optional code for content the company specifies, and how the identification number is composed, where it is placed and how it is marked.
It defines terms such as fixing method, category, class and the five mass groups from group 0 to group III, with the child weight range each group covers. It does not apply to the coding of individual components of a child restraint.
Brand owners and manufacturers use it together with GB 27887 and GB/T 36120-2018. It was issued on 14 May 2018 and has applied since 1 December 2018.
Found what you need?
Document preview — GB/T 36124-2018
National Standard of the People's Republic of China
- ICS
- 43.040.60
- Classification
- T 26
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword3
- 1 Scope4
- 2 Normative references4
- 3 Terms and definitions4
- 4 Production model and composition method5
- 5 Product identification code6
Foreword
This Standard was drafted in accordance with the rules given in GB/T 1.1-2009.
1 Scope
This Standard specifies the basic composition and expression of the production model of the child restraint system of power-driven vehicles, the basic composition of the product identification code of the child restraint system, the location of the content mark, and the marking requirements.
This Standard is applicable to child restraint system products of motor vehicles sold in China.
This Standard does not apply to the identification and coding of components of child restraint system.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB 27887 Restraining devices for child occupants of power-driven vehicles
GB/T 36120-2018 Production label for child restraint system of power-driven vehicles
3 Terms and definitions
The terms and definitions specified in GB 27887 and below shall apply to this document.
3.1 Production model
A set of codes specified to identify a child restraint system, which may consist of letters and numbers.
3.2 Identification number
A set of codes, composed of letters and numbers, assigned for the product by the child restraint system brand owner, in order to identify the basic features of the child restraint system.
3.3 Fixing method
The installation and fastening method of child restraint system on vehicles, such as seat belt, ISOFIX, etc.
3.4 Category
Classification of the child constraint system according to the location fixed on the vehicle, such as universal, restrained, semi-universal, and special vehicle.
3.5 Class
Classification of child restraint system according to the ways children are constrained, such as integral or non-integral.
3.6 Group
The five quality groups of the child restraint system. group 0, group 0+, group I, group II and group III.
Note 1. group 0 is used for children weight less than 10kg.
Note 2. group 0+ is used for children weight less than 13kg.
Note 3. group I is used for children weight 9kg ~ 18kg.
Note 4. group II is used for children weight 15kg ~ 25kg.
Note 5. group III is used for children weight 22kg ~ 36kg.
4 Production model and composition method
4.1 Basic composition
4.1.1 The child restraint system production model mainly consists of the company code, product design code and modification code. If necessary, company specified content code can be added.
4.1.2 Company code, product design code, modification code and company specified content code shall be determined by the child restraint system brand owner.
4.1.3 The company code shall be unique to each brand of child restraint system and […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 36124-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 27887-2024 — Child restraint systems for power-driven vehicles
GB/T 36120-2018 — Production label for child restraint system of power-driven vehicles
GB/T 7251.4-2026 — Low-voltage switchgear and controlgear assemblies - Part 4: Particular requirements for assemblies for construction sites (ACS)
Secure payment via Stripe
Payments accepted
GB/T 36124-2018
$85.00