GB/T 36120-2018Production label for child restraint system of power-driven vehicles (English PDF)
机动车用儿童约束系统产品标识
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 36120-2018 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
May 14, 2018
Implementation date
December 1, 2018
Scope
GB/T 36120-2018 is the English-translated version of 机动车用儿童约束系统产品标识.
GB/T 36120-2018 sets out what the production label of a child restraint system for motor vehicles must show and how it must hold up in use.
It defines the production label and covers its content, including the installation diagram with the adult belt path marked in red for forward-facing and in blue for rearward-facing seats, the warning information, and the layout and pattern of the label.
Performance requirements cover legibility and permanent fixing, checked by a wiping test with water and household detergent, by room, high and low temperature and cyclic ageing tests on paper and metal labels, and by a tensile test on sewn fabric labels.
It applies to child restraint products sold in China and is used by their manufacturers and test laboratories. It was issued on 14 May 2018 and has applied since 1 December 2018.
Found what you need?
Document preview — GB/T 36120-2018
National Standard of the People's Republic of China
- ICS
- 43.040.60
- Classification
- T 26
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword3
- 1 Scope4
- 2 Normative References4
- 3 Terms and Definitions4
- 4 Content of Production Label4
- 5 Layout and Pattern8
- 6 Performance Requirements8
- 7 Performance Test Methods9
1 Scope
This Standard specifies terms, definitions, content, layout, pattern, performance requirements and experiment methods of production label for child restraint system of power-driven vehicles.
This Standard is applicable to child restraint system products of power-driven vehicles sold within the territory of China.
2 Normative References
The following documents are indispensable to the application of this Standard. In terms of references with a specified date, only versions with a specified date are applicable to this Standard. The latest version (including all the modifications) of references without a specified date is also applicable to this Standard.
GB 6675.4 Safety of Toys - Party 4. Migration of Certain Elements
GB 27887 Restraining Devices for Child Occupants of Power-driven Vehicles
ISO 2575:2004-Z.01 Road Vehicles - Symbols for Controls, Indicators and Tell-tales
3 Terms and Definitions
The following terms and definitions, as well as terms and definitions provided in GB 27887 are applicable to this Standard.
3.1 Production Label for Child Restraint System
Production label for child restraint system refers to label that's adopted to indicate relevant information of child restraint system products.
4 Content of Production Label
4.2.2.3 "Warning information" indicates matters needing attention during the application of the child restraint system. It shall include j) as specified in 4.1, and indicate the following information.
a) Child restraint system that can be applied both forward and backward shall indicate the following information. "important -- it shall not be applied forward before child's weight exceeds XX (please refer to the instruction for usage)".
b) Warning information of backward child restraint system belongs to one of the content of "warning information". However, it shall be separately indicated in the area where child's head shall be placed in the child restraint system in accordance with the requirements in GB 27887. A warning label indicated in Figure 4 shall be pasted to the internal visible surface (including both sides near the head). This label shall satisfy stipulations in GB 27887.
6 Performance Requirements
6.3 The label shall be permanently fixed and easily visible to seat installers; the content of the label shall still be recognizable after the test described in 7.1.
6.4 After temperature test of paper label and metal label in accordance with the method described in 7.2, the label cannot be lifted up, and shall be easily readable.
6.5 After tensile test of fabric sewing label in accordance with the method described in 7.3, the label shall not be pulled off.
7 Performance Test Methods
7.1 Wiping-resistance Test
Use cotton that's soaked with clear water and wipe the surface of label for 20 times under pressure that's >=10 N. Dry it, then, use cotton that's soaked with undiluted household detergent (non-concentrated laundry detergent) to wipe the surface of label for 20 times under pressure that's >=10 N. Observe changes of the content of label.
7.2 Temperature Test
7.2.1 Room temperature
Place components or assembled child restraint system (with label) under room temperature 23 °C ± 2°C, relative humidity 50% ± 10% for 24 h. Make attempts to lift the label without using any tools or solvent.
7.2.2 High temperature
Place components or assembled child restraint system (with label) in a test chamber under 80 °C ± 2°C, relative humidity 65% ± 5% for 24 h. Take it out, then, place under room temperature 23 °C ± 2°C for 24 h. Make attempts to lift the label without using any tools or solvent.
7.2.3 Low temperature
Place components or assembled child restraint system (with label) in a test chamber under -30 °C ± 2°C for 24 h. Take it out, then, place under room temperature 23 °C ± 2°C for 24 h. Make attempts to lift the label without using any tools or solvent.
7.2.4 Cyclic aging
Place components or assembled child restraint system (with label) in a test chamber under ambient temperature >= 80 °C for over 24 h. Take it out and cool it down to room temperature 23 °C ± 2°C. After the cooling process, immediately start 3 successive 24 h cycle. Each cycle shall include the following successive procedures. […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 36120-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 27887-2024 — Child restraint systems for power-driven vehicles
GB 6675.4-2014 — Safety of toys-Part 4:Migration of certain elements
GB 6675.4-2025 — Safety of toys - Part 4: Migration of certain elements
Secure payment via Stripe
Payments accepted
GB/T 36120-2018
$125.00