GB/T 35951-2018Determination of eight macrolide antibiotics such as spiramycin in cosmetics—LC-MS/MS (English PDF)
化妆品中螺旋霉素等8种大环内酯类抗生素的测定 液相色谱-串联质谱法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 35951-2018 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
February 6, 2018
Implementation date
September 1, 2018
Scope
GB/T 35951-2018 is the English-translated version of 化妆品中螺旋霉素等8种大环内酯类抗生素的测定 液相色谱-串联质谱法.
GB/T 35951-2018 is a liquid chromatography-tandem mass spectrometry (LC-MS/MS) method for determining eight macrolide antibiotics in cosmetics: spiramycin, azithromycin, tilmicosin, oleandomycin, erythromycin, tylosin, clarithromycin and roxithromycin.
These are prohibited substances under China's Cosmetics Safety Technical Specification (2015 edition), and the standard provides a way of testing for them without setting limits.
It applies to cream and lotion cosmetics. Samples are extracted ultrasonically, centrifuged, purified on solid-phase extraction cartridges and measured and confirmed by LC-MS/MS, with external standard quantification.
The standard also specifies reagents, buffer and standard solutions, result calculation, recovery and precision, with the detection and quantitation limits given in its Appendix A. It was issued on 6 February 2018 and has applied since 1 September 2018.
Found what you need?
Document preview — GB/T 35951-2018
National Standard of the People's Republic of China
- ICS
- 71.100.70
- Classification
- Y 42
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- Introduction
- 1 Scope
- 2 Normative references
- 3 Test methods
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
Introduction
The standard test substance is China's "Cosmetics Safety Technical Specification (2015 Edition)" Prohibited substances.
Prohibited substances are those that can not be added to cosmetics as a raw material for the production of cosmetics. "Cosmetic safety specification (2015 Edition) states. "If technically unavoidable banned substances are introduced as impurities into cosmetics, a safety risk assessment should be carried out to ensure Under normal, reasonable and predictable conditions of use shall not cause harm to human health.
At present, China has not provided for the limited value of these substances, the development of this standard, only for the detection of these substances in cosmetics to provide testing methods.
1 Scope
This standard specifies the cosmetics spiramycin, azithromycin, tilmicosin, oleandomycin, erythromycin, tylosin, clarithromycin, Luo Methods for the determination of erythromycin content by liquid chromatography-tandem mass spectrometry (LC-MS/MS), calculation of results, recovery and precision, Poor content.
This standard applies to cream lotion, cosmetics, spirithromycin, azithromycin, tilmicosin, oleandomycin, erythromycin, Tylosin Su, clarithromycin, roxithromycin content determination.
The detection limits and quantitative limits of this standard method, see Appendix A in Table A.1.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this document. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 6682 analytical laboratory water specifications and test methods
3 Test methods
3.1 Principle
Samples were extracted by ultrasonic extraction, centrifugation, purification by solid phase extraction cartridges, liquid chromatography - tandem mass spectrometry determination and confirmation, external standard Legal quantity.
3.2 Reagents and materials
Unless otherwise indicated, all reagents are of analytical grade, water is a water GB/T 6682 regulations.
3.2.1 Methanol. chromatography pure.
3.2.2 Acetonitrile. Chromatographic purity.
3.2.3 Formic acid. Chromatographic purity.
3.2.4 N-hexane. chromatographic purity.
3.2.5 Sodium hydroxide.
3.2.6 Sodium dihydrogen phosphate.
3.2.7 0.1mol/L sodium hydroxide solution. Weigh 4.0g sodium hydroxide, and diluted with water to 1L.
3.2.8 Aqueous methanol solution (37). Measure 30mL of methanol (3.2.1) was mixed with 70mL of water.
3.2.9 Acetonitrile solution (28). Take 20 mL of acetonitrile (3.2.2) and mix with 80 mL of water.
3.2.10 Phosphate buffer solution (0.1mol/L). Dissolved 12.2g sodium dihydrogen phosphate in 950mL water, with 0.1mol/L sodium hydroxide The solution was adjusted to pH 8.0 and finally diluted to 1 L with water.
3.2.11 8 kinds of macrolide antibiotics standard samples/substances. purity of not less than 96%. Spiramycin, azithromycin, tilmicosin, bamboo Amoxicillin, Erythromycin, Tylosin, Clarithromycin, Roxithromycin Drug Name, English Name, CAS Registry Number, Formula, Relative Molecular […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
Similar standards
How to Download GB/T 35951-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 6682-1992 — Water for analytical laboratory use--Specification and test methods
GB/T 6682-2008 — Water for analytical laboratory use - Specification and test methods
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 35951-2018
$205.00