GB/T 35941-2018Aquaculture aerator directire rules (English PDF)
水产养殖增氧机检测规程
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 35941-2018 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
February 6, 2018
Implementation date
September 1, 2018
Scope
GB/T 35941-2018 is the English-translated version of 水产养殖增氧机检测规程.
GB/T 35941-2018 sets out the rules for inspecting aerators used in aquaculture, covering sampling, test items and methods and how the results are judged; it may also be used as a reference for other aeration equipment.
An inspection lot is made up of aerators of the same model, specification, process, material and batch, and the producer must supply a valid type inspection report, factory inspection report and certificate of conformity.
Sampling follows a normal inspection plan of GB/T 2828.1 at general inspection level I, with samples taken at random. Test items are chosen from a table according to the structure and type of aerator, with terms taken from SC/T 6009 and product requirements from SC/T 6010 for impeller aerators and SC/T 6017 for waterwheel aerators. It was issued on 6 February 2018 and has applied since 1 September 2018.
Found what you need?
Document preview — GB/T 35941-2018
National Standard of the People's Republic of China
- ICS
- 65.150
- Classification
- B 94
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Samples
- 5 Test items and methods
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
1 Scope
This standard specifies the aerator sampling, test items and methods, test results to determine.
This standard applies to aquaculture aerator detection, detection of other types of aerobic equipment may refer to the implementation.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this document. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 2828.1 Sampling procedures for inspection - Part 1. Batch inspection sampling plan by acceptance quality limit (AQL)
GB/T 3768 Acoustics sound pressure method for the determination of noise source sound power level above the reflective surface using envelope measurement of surface simple method
GB/T 13306 signs
GB/T 13384 mechanical and electrical product packaging General technical conditions
Test Method for Aerobic Capacity of SC/T 6009 Aerobics Machine
SC/T 6010 impeller aerator technical conditions
SC/T 6017 waterwheel aerator
3 Terms and definitions
SC/T 6009 defined terms and definitions apply to this document.
4 Samples
4.1 The composition of the batch
Should be in accordance with the same model, the same specifications, the same process, the same material and the same batch of batch approval of the principle of bulk batch sampling.
4.2 Sampling conditions
For the sampled inspection lot, the production unit shall provide an effective product type inspection report, the factory inspection report and the product qualification Proof and so on.
4.3 Sampling plan
4.3.1 The use of GB/T 2828.1 provisions of a normal inspection sampling plan.
4.3.2 Test level for the general test level I
4.4 Sampling method
Samples should be in the inspection batch, randomly selected.
5 Test items and methods
According to the structure and type of aerator, according to Table 1 to select and determine the appropriate test items and methods.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 2828.1Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB/T 3768Acoustics -- Determination of sound power levels and sound energy levels of noise sources using sound pressure -- Survey method using an enveloping measurement surface over a reflecting plane
- GB/T 13306Plates
- GB/T 13384General specifications for packing of mechanical and electrical product
Similar standards
How to Download GB/T 35941-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
GB/T 35941-2018
$85.00