GB/T 35864-2018Grain and oil machinery－Grain volume-weight meter for inspection (English PDF)
粮油机械 检验用粮食容重器
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 35864-2018 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
February 6, 2018
Implementation date
September 1, 2018
Scope
GB/T 35864-2018 is the English-translated version of 粮油机械 检验用粮食容重器.
GB/T 35864-2018 covers the grain volume-weight meter, the laboratory instrument used to measure the test weight of grain, meaning its mass per unit volume expressed in grams per litre.
It sets the terms and definitions, the working principle, classification, main structure and model designation of the meter, then its technical requirements, test methods and inspection rules, and closes with marking, packaging, transport and storage.
The working principle describes the non-self-indicating version, in which the sample falls from the hopper through a middle tube into the measuring cylinder. The standard refers to the bulk density method of GB/T 5498 and to the verification regulations for non-self-indicating and digital indicating scales.
Manufacturers and grain inspection laboratories use it. It was issued on 6 February 2018 and has applied since 1 September 2018.
Found what you need?
Document preview — GB/T 35864-2018
National Standard of the People's Republic of China
- ICS
- 67.060
- Classification
- B 20
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Working principle
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
1 Scope
This standard specifies the terms and definitions of inspection of food containers, working principle, classification, the main structure, product type, technical requirements, test Inspection methods, inspection rules, marking, packaging, transport and storage requirements.
This standard applies to the determination of food bulk density testing equipment (hereinafter referred to as weighing device).
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this document. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 191 Packaging - Pictorial signs
GB/T 1031 Geometrical product specifications (GPS) Surface texture Profile method Surface roughness parameters and their values
GB/T 2828.1 Sampling procedures for inspection - Part 1. Batch inspection sampling plan by acceptance quality limit (AQL)
GB/T 2829 cycle test count sampling procedures and tables (for the stability of the test process)
GB 5226.1 Safety of machinery - Electrical machinery and electronic equipment - Part 1. General requirements
GB/T 5498 food inspection bulk density determination
GB/T 9438 aluminum alloy castings
GB/T 13306 signs
GB/T 24854 General technical requirements for grain and oil mechanical product packaging
GB/T 25218 General technical requirements for coating of grain and oil machinery products
QB/T 1563 Scale product model preparation methods
JJG14 non-self-indicating scale
JJG264 container
JJG539 digital indicating scale
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Test weight
Grain, oil Grain mass per unit volume, expressed in grams per liter (g/L).
3.2 Grain volume-weight meter
Determination of bulk food testing equipment.
4 Working principle
4.1 non-self-indicating weighing capacity device. the measured grain entering from the cereal barrel, falling into the capacity barrel through the middle tube into a natural arrangement, insert insert segmentation […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 1031Geometrical product specifications(GPS) - Surface texture: Profile method - Surface roughness parameters and their values
- GB/T 2828.1Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB/T 2829Sampling procedures and tables for periodic inspection by attributes
- GB/T 5498Inspection of grain and oils - Determination of test weight
- GB/T 9438Aluminum alloy castings
GB 5226.1 · QB/T 1563
Similar standards
How to Download GB/T 35864-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1031-2009 — Geometrical product specifications(GPS) - Surface texture: Profile method - Surface roughness parameters and their values
GB/T 10318-1988 — Phosphor Y20 for low-light-level picturetubes and storage tubes
GB/T 10319-2008 — General specifications for marine pneumatic measurement and control instruments
Secure payment via Stripe
Payments accepted
GB/T 35864-2018
$205.00