Valid

GB/T 35824-2018Determination of 20 kinds of prohibited and restricted dyestuff in hair dyes—High performance liquid chromatography (English PDF)

染发类化妆品中20种禁限用染料成分的测定 高效液相色谱法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 35824-2018 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

February 6, 2018

Implementation date

September 1, 2018

Scope

GB/T 35824-2018 is the English-translated version of 染发类化妆品中20种禁限用染料成分的测定 高效液相色谱法.

GB/T 35824-2018 gives a high performance liquid chromatography method for determining 20 prohibited and restricted dyestuffs in hair dyes, among them 1,4-diaminobenzene, 4-aminophenol, 1-naphthol and 2,7-dihydroxynaphthalene.

The sample is extracted with solvent, separated by HPLC, detected with a diode array detector and quantified by the external standard method.

The standard lists the reagents, including methanol, ethanol, phosphate buffer solutions and the standard stock solutions, the instruments, the extraction methods for different groups of dyestuffs, the chromatographic conditions, the calculation of results, the recovery rate and the precision.

Its annexes give the detection and quantification limits, the identity data of each dyestuff and reference chromatograms of the standard substances. It was issued on 6 February 2018 and has applied since 1 September 2018.

Found what you need?

Document preview — GB/T 35824-2018

National Standard of the People's Republic of China

ICS
71.100.70
Classification
Y 42

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword3
  • Introduction4
  • 1 Scope5
  • 2 Normative references5
  • 3 Summary of method5
  • 4 Reagents and materials5
  • 5 Instruments and equipment7
  • 6 Preparation of specimen7
  • 7 Analytical procedures8
  • 8 Calculation of results10
  • 9 Recovery rate10
  • 10 Precision10
  • Appendix A (Informative) Detection limit and limit of quantitation of 20 kinds of prohibited and restricted dyestuff11
  • Appendix B (Informative) Chinese name, INCI name, CAS number, molecular formula, structural formula, relative molecular mass of 20 kinds of prohibited and restricted dyestuff12
  • Appendix C (Informative) Liquid chromatogram of standard substances of 20 kinds of prohibited and restricted dyestuff15

1 Scope

This standard specifies the high-performance liquid chromatography method for the determination of 20 kinds of prohibited and restricted dyestuff in hair dyes.

This standard applies to the determination of 20 kinds of prohibited and restricted dyestuff in hair dyes.

The detection limits and quantification limits for the dyestuff components of this standard are as given in Table A.1 of Appendix A.

2 Normative references

The following documents are essential to the application of this document. For the dated documents, only the versions with the dates indicated are applicable to this document; for the undated documents, only the latest version (including all the amendments) are applicable to this standard.

GB/T 6682 Water for analytical laboratory use - Specification and test methods

3 Summary of method

After the specimen is extracted by solvent, it is separated by high-performance liquid chromatography, detected by diode array detector, quantified by external standard method.

4 Reagents and materials

Unless otherwise stated, the water used is the grade I water as specified in GB/T 6682.

4.1 Standard substances. The Chinese names, INCI names, CAS numbers, molecular formulas, structural formulas, relative molecular masses of the 20 kinds of prohibited and restricted dyestuff are as listed in Table B.1 of Appendix B.

4.2 Methanol. Chromatographically pure.

4.3 Ethanol. Analytically pure.

4.4 Potassium dihydrogen phosphate. Analytically pure.

4.5 Disodium hydrogen phosphate. Analytically pure.

4.6 Sodium bisulfite. Analytically pure.

4.7 Sodium hydrogen sulfite aqueous solution (1 g/L). Weigh 1.00 g (accurate to 0.01 g) of sodium bisulfite (4.6) into a volumetric flask. Add water to make its volume reach to 1000 mL.

4.8 Aqueous ethanol solution. [Ethanol + sodium hydrogen sulfite aqueous solution (4.7)] = 1 + 1 (volume ratio).

4.9 0.05 mol/L phosphate buffer solution. Accurately weigh 6.8045 g (accurate to 0.0001 g) of potassium dihydrogen phosphate (4.4) and 17.907 g (accurate to 0.0001 g) of disodium hydrogen phosphate (4.5) into the volumetric flask. Add water to make its volume reach to 1000 mL.

4.10 Ethanol + 0.05 mol/L phosphate buffer solution = 1 + 49 (volume ratio).

4.11 Ethanol + 0.05 mol/L phosphate buffer solution = 1 + 1 (volume ratio).

4.12 Ethanol + 0.05 mol/L phosphate buffer solution = 5 + 95 (volume ratio).

4.13 Standard stock solution A. Respectively, accurately weigh 50 mg of each standard substance (1,4-diaminobenzene, 1,2-diaminobenzene, 1,3-diaminobenzene, 4-aminophenol, 3-aminophenol, 1,3-dihydroxylbenzene, 4-amino-2-hydroxytoluene, 2-methyl-5-N-hydroxyethylaminophenol, 2-methyl-5-amino-6-chlorophenol, 6-hydroxyindole, 4-chlororesorcinol, hydroxybenzomorpholine, o-aminophenol, 6-amino-m-cresol, 1-naphthol, 1,5-naphthalenediol, 2,7-dihydroxynaphthalene, a total of 17 kinds) (accurate to 0.1 mg) in a brown volumetric flask. Use the ethanol aqueous solution (4.8) to dissolve it to make its volume reach to 10 mL. Prepare it into a standard stock solution which has a concentration of 5 mg/mL. Preserve it at 4 °C ~ 6 °C in the dark. The preservation period is 3 days.

Standard stock solution B. Respectively, accurately weigh 50 mg of each standard substance (2-methyl-1,4-benzenediamine sulfate, N,N-bis(2-hydroxyethyl)-p-phenylenediamine sulfate, a total of 2 kinds) (accurate to 0.1 mg) in a brown volumetric flask. Use the sodium bisulfite aqueous solution (4.7) to dissolve it to make its volume reach to 10 mL. […]

6 Preparation of specimen

Method 2. Accurately weigh 1.0 g of sample (accurate to 0.001 g) in a 25 mL graduated plastic centrifuge tube with stopper. Add the mixed solution of ethanol + 0.05 mol/L phosphate buffer solution = 1 + 49 (volume ratio) (4.10) to make its volume reach to 25 mL. Vigorously shake it to disperse the sample. Vortex it for 1 min. Ultrasonic it for 15 min. Centrifuge it at 5000 r/min for 10 min. Use the 0.45 µm filter membrane to filter the supernatant, to obtain the determination solution. Use the high-performance liquid chromatography for determination.

Note: Is it suitable for the separation of the following 13 dyestuffs. 1,4-diaminobenzene, 1,2-diaminobenzene, 1,3-diaminobenzene, 4-aminophenol, m-aminophenol, 1,3-dihydroxylbenzene, 4-amino-2-hydroxytoluene, hydroxybenzomorpholine, o-aminophenol, 6-amino-m-cresol, 2-methyl-1,4-benzenediamine sulfate, N,N-bis(2-hydroxyethyl)-p-phenylenediamine sulfate, 4-nitro-o-phenylenediamine.

Method 3. Accurately weigh 1.0 g of sample (accurate to 0.001 g) in a 25 mL graduated plastic centrifuge tube with stopper. Add the mixed solution of ethanol + 0.05 mol/L phosphate buffer solution = 1 + 1 (volume ratio) (4.11) to make its volume reach to 25 mL. Vigorous shake it to disperse the sample. Vortex it for 1 min. Ultrasonic it for 15 min. Centrifuge it at 5000 r/min for 10 min. Use the 0.45 µm filter membrane to filter the supernatant, to obtain the determination solution. Use the high-performance liquid chromatography for determination.

Note: It is suitable for the separation of the following 7 dyestuffs. 2-methyl-5-N-hydroxyethylaminophenol, 2-methyl-5-amino-6-chlorophenol, 6-hydroxyindole, 4-chlororesorcinol, 1-naphthol, 1,5-naphthalenediol, 2,7-dihydroxynaphthalene.

7 Analytical procedures

7.1 Reference conditions for liquid chromatography

The reference conditions for liquid chromatography are as follows.

a) Column. Poroshell HPH C18, 2.7 µm, 3.0 mm × 100 mm (or equivalent);

b) Column's temperature. 30 °C;

c) Detector. Diode array detector; […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download GB/T 35824-2018

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 35824-2018

$125.00