GB/T 35753-2017Installation rack standard for outdoor unit of air-conditioning (English PDF)
空调器室外机安装用支架
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 35753-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 29, 2017
Implementation date
July 1, 2018
Scope
GB/T 35753-2017 is the English-translated version of 空调器室外机安装用支架.
GB/T 35753-2017 fixes the bracket on which the outdoor unit of a room air conditioner is mounted.
Clause 1 states that the standard specifies the mounting bracket for the outdoor unit of a room air conditioner together with its requirements, test methods, signs, packaging, transportation and storage, and that it applies to the mounting brackets of outdoor units of room air conditioners of rated cooling capacity below 14000 W. As the draft shows the body, Scope is followed by Normative references, Terms and definitions and the requirements clause.
The terms clause takes over the definitions of GB 17790 and adds the bracket itself, as the member that allows the outdoor unit of an air conditioner to be reliably fixed to a mounting surface, the mounting supporting structure, as the building facade to which the bracket is fixed and which the figures show in vertical section, and a third term, for the component that supports and fixes the outdoor unit on the bracket and that the figures show as the horizontal part, whose term name the draft runs together illegibly.
The requirements clause opens with classification, dividing brackets by installation method into wall-mounted and platform types, with two structural layouts shown for the wall-mounted type, one for air conditioners of cooling capacity from 5000 W to 7500 W and one for cooling capacity below 5000 W, and dividing them by material into three categories, among them hot-rolled steel and stainless steel; the draft breaks off inside that subclause, so the requirements themselves and the test methods are not shown.
Clause 2 cites GB/T 191 on packaging pictorial signs, GB/T 700 on carbon structural steel, GB/T 1019 on the packaging of household and similar electrical appliances, GB/T 2828.1 on sampling inspection by acceptance quality limit, GB/T 10125 on the salt spray corrosion test and GB 17790 on the installation of household and similar air conditioners, together with a standard on the mechanical properties of fasteners whose number the draft does not print.
The foreword carries a patent notice and records that the standard was proposed by the China Light Industry Federation and is handled by the national household appliances standardization technical committee (SAC/TC46). It was issued on 29 December 2017 and has applied since 1 July 2018.
Found what you need?
Document preview — GB/T 35753-2017
National Standard of the People's Republic of China
- ICS
- 97.030
- Classification
- Y 60
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions GB 17790 defined and the following
- 4 Requirements
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
1 Scope
This standard specifies the room air conditioner outdoor unit mounting bracket, requirements, test methods, signs, packaging, transportation and storage.
This standard applies to room air conditioners (rated cooling capacity below 14000W) outdoor unit mounting bracket.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this document. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 191 Packaging - Pictorial signs
GB/T 700 carbon structural steel
GB/T 1019 Household and similar electrical appliances packaging General
GB/T 2828.1 Sampling procedures for sampling inspection - Part 1: Batch inspection sampling plan retrieved by acceptance quality limit (AQL)
Mechanical properties of fasteners - Bolts, screws and studs
GB/T 10125 artificial atmosphere corrosion test salt spray test
GB 17790 Household and similar use air conditioner installation specification
3 Terms and definitions
GB 17790 defined and the following terms and definitions apply to this document.
3.1 Air conditioner outdoor unit mounting bracket
instalationrackstandardforoutdoorunitofair-conditioning A member (simply referred to as a bracket) (see FIG. 1, FIG. 2 and FIG. 3) that allows the outdoor unit of an air conditioner to be reliably fixed to a mounting surface.
3.2 Mounting surface mount
instalationsupportingstructure The bracket is fixed to the building facade (vertical section in Figure 1, Figure 2).
3.3 The level of bracket
Components for supporting and fixing the outdoor unit of the air conditioner (the horizontal part in FIG. 1 and FIG. 2) on the bracket.
4 Requirements
4.1 Classification
According to different installation methods are divided into two kinds of wall-mounted and platform. Wall-mounted air conditioner outdoor unit according to the cooling capacity of different, there are two Structure diagram, see Figure 1 and Figure 2, which Figure 1 applies to the cooling capacity of 5000W <= CC <= 7500W air conditioner, Figure 2 is suitable for cooling Air conditioning < 5000W Platform air conditioner outdoor unit bracket structure shown in Figure 3.
According to different materials are divided into hot-rolled steel (commonly known as angle), galvanized steel or galvanized steel, stainless steel three categories.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 700Carbon structural steels
- GB/T 1019General requirements for the package of household and similar electrical appliances
- GB/T 2828.1Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB/T 10125Corrosion tests in artificial atmospheres - Salt spray tests
GB 17790
Similar standards
How to Download GB/T 35753-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10125-2021 — Corrosion tests in artificial atmospheres - Salt spray tests
GB/T 1019-2008 — General requirements for the package of household and similar electrical appliances
GB/T 10190-2012 — Fixed capacitors for use in electronic equipment -- Part 16: Sectional specification -- Fixed metallized polypropylene film dielectric d.c. capacitors
Secure payment via Stripe
Payments accepted
GB/T 35753-2017
$145.00