GB/T 35747-2017Technical requirements and test methods for air jet room air conditioner (English PDF)
空气射流式房间空调器技术要求及试验方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 35747-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 29, 2017
Implementation date
July 1, 2018
Scope
GB/T 35747-2017 is the English-translated version of 空气射流式房间空调器技术要求及试验方法.
GB/T 35747-2017 is the Chinese standard "Technical requirements and test methods for air jet room air conditioner". Its scope clause reads: This standard specifies the terms and definitions of air jet room air conditioners (hereinafter referred to as "air conditioners"), technical requirements and tests method.
This standard applies to air jet room air conditioners. Its clauses include terms and definitions; technical requirements.
Found what you need?
Document preview — GB/T 35747-2017
National Standard of the People's Republic of China
- ICS
- 97.030
- Classification
- Y 61
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 technical requirements
- 5 test methods
- Appendix A (informative) air jet air conditioner model name
- Appendix B (normative) air supply distance test
1 Scope
This standard specifies the terms and definitions of air jet room air conditioners (hereinafter referred to as "air conditioners"), technical requirements and tests method.
This standard applies to air jet room air conditioners.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 7725-2004 room air conditioners
3 Terms and definitions
GB/T 7725-2004 defined and the following terms and definitions apply to this document.
3.1 Annular air outlet
An annular duct body has a through-duct that penetrates through the annular hood body. A wall of the annular-shaped hood body is formed with an air duct communicating with the interior of the air conditioner and a through-
Air duct air-conditioning ring opening.
3.2 Air jet airjetflow
Based on the fluid ejecting principle, the air around the tuyere is ejected through the annular air ejecting device to increase the air volume and air outlet temperature,
Adaptive technology.
3.3 Air jet air conditioner
Air-jet technology air conditioner products.
4 technical requirements
4.1 General requirements
In addition to the requirements of this standard, air conditioners should also meet the requirements of Chapter 5 of GB/T 7725-2004.
The type of product should meet the requirements of GB/T 7725-2004 in 4.1, the basic parameters should be consistent with 4.2 of GB/T 7725-2004
Claim.
Air jet air conditioner model naming method can be found in Appendix A.
4.2 air jet air flow conditions
4.2.1
Air conditioner rated cooling capacity <= 4500W, the air jet state of the measured value of the air flow should not be less than the non-air jet state […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 35747-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 35747-2017
$145.00