GB/T 35723-2017Rapid test method for surface salt-freezing resistance of precast concrete paving units (English PDF)
混凝土路面砖抗冻性表面盐冻快速试验方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 35723-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 29, 2017
Implementation date
November 1, 2018
Scope
GB/T 35723-2017 is the English-translated version of 混凝土路面砖抗冻性表面盐冻快速试验方法.
GB/T 35723-2017 is the Chinese standard "Rapid test method for surface salt-freezing resistance of precast concrete paving units".
Its scope clause reads: This standard specifies the rapid test method for the determination of concrete pavement tiles and concrete pavement (hereinafter referred to as pavement tiles) surface frost resistance Principle, equipment, test materials, specimens, test procedures, calculation and evaluation of test results, test reports.
This standard applies to the rapid determination of pavement brick surface frost resistance. Its clauses include principle; device.
Found what you need?
Document preview — GB/T 35723-2017
National Standard of the People's Republic of China
- ICS
- 91.100.30
- Classification
- Q 14
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 principle
- 4 equipment
- 5 test materials
- 6 test pieces
- 7 Test Procedure
- 8 test results calculation and evaluation
- 9 Test Report
1 Scope
This standard specifies the rapid test method for the determination of concrete pavement tiles and concrete pavement (hereinafter referred to as pavement tiles) surface frost resistance
Principle, equipment, test materials, specimens, test procedures, calculation and evaluation of test results, test reports.
This standard applies to the rapid determination of pavement brick surface frost resistance.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 30435 electric oven and electric blast oven
JG/T 243 concrete antifreeze test equipment
3 principle
Frozen and thawed devices on the surface of the pavement brick salt freezing test to determine the amount of peel off after the freeze-thaw pavement brick to measure the surface of the pavement brick
Frost resistance.
4 device
4.1 low temperature testing machine
Low-temperature testing machine should meet the provisions of JG/T 243. Under full load operating conditions, the air temperature in the low temperature test enclosure during freezing should be
Can be maintained at -20 °C ~ -18 °C range. Full load when the temperature difference between the box should not exceed 2 °C.
4.2 constant temperature and humidity chamber
Temperature should be adjustable to 25 °C, uniformity of ± 2 °C; relative humidity should be adjusted to 50%, evenness of 2% to -3%.
4.3 electric blast oven
Electric blast drying oven should meet the requirements of GB/T 30435. The temperature inside the tank should be kept within the range of (105 ± 5) ° C; the temperature fluctuates
Degree. <=1 °C; Temperature uniformity. <=2%.
4.4 concrete cutting machine
Should adopt desktop equipment for cutting large-size pavement tiles, making the sample in line with the requirements of this standard.
4.5 weighing equipment
Electronic balance, the maximum range 1000g, accuracy of not less than 0.1g.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 35723-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 35723-2017
$145.00