Valid

GB/T 35655-2017Guideline for verification and validation of chemical analysis method and internal quality control—Chromatography (English PDF)

化学分析方法验证确认和内部质量控制实施指南 色谱分析

Preview PDF

This is a limited preview

Buy now to download the full PDF (54 pages)

Need quotation for your management?

Get a formal quotation for GB/T 35655-2017 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 29, 2017

Implementation date

July 1, 2018

Scope

GB/T 35655-2017 is the English-translated version of 化学分析方法验证确认和内部质量控制实施指南 色谱分析.

GB/T 35655-2017 is the Chinese standard "Guideline for verification and validation of chemical analysis method and internal quality control—Chromatography".

Its scope clause reads: This standard gives guidelines for the validation of method validation based on chromatographic analysis and the establishment of an internal laboratory quality control system, including Then, method verification verification technology, inspection process quality control and analysis system verification.

This standard is applicable to the verification and confirmation of the method based on chromatographic analysis and the establishment of an internal laboratory quality control system. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 35655-2017

National Standard of the People's Republic of China

ICS
03.120.10
Classification
A 00

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Preface
  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 4 General
  • 5 Method Verification Confirmation Technology
  • 5.1 Analysis System Adaptability
  • 5.2 Selectivity
  • 5.3 Stability
  • 5.4 Durability
  • 5.5 Linearity and Calibration
  • 5.6 Recovery rate
  • 5.7 Limits of Detection and Limits of Quantification
  • 5.8 Accuracy
  • 5.9 Precision
  • 5.10 Measurement uncertainty
  • 6 Inspection Process Quality Control
  • 7 Analysis System Verification
  • 7.1 General
  • 7.2 Participate in proficiency testing or measurement audit plan
  • 7.3 Inter-laboratory comparison
  • 7.4 Using Control Chart Verification and Analysis System
  • Appendix A (Informative Appendix) Calibration Curve Linear Evaluation Example
  • Appendix B (informative annex) Example of evaluation of the significance of recovery
  • Appendix C (Informative) Evaluation Limits and Limits of Quantification Example
  • Appendix D (Informative Appendix) Example of Accuracy Evaluation
  • Appendix E (Informative) Precision Evaluation Example
  • Appendix F (Informative) Evaluation Examples of Measurement Uncertainty
  • Appendix G (Informative) Control Chart Application Example
  • References

1 Scope

This standard gives guidelines for the validation of method validation based on chromatographic analysis and the establishment of an internal laboratory quality control system, including

Then, method verification verification technology, inspection process quality control and analysis system verification.

This standard is applicable to the verification and confirmation of the method based on chromatographic analysis and the establishment of an internal laboratory quality control system.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article

Pieces. For undated references, the latest version (including all amendments) applies to this document.

GB/T 6379.1 Accuracy (correctness and precision) of measurement methods and results Part 1. General rules and definitions

GB/T 6379.4-2006 Accuracy (trueness and precision) of measurement methods and results Part 4. Determination of standard measures

The correct basic method of law

GB/T 6379.6-2009 Accuracy (trueness and precision) of measurement methods and results Part 6. Actual values of actuality application

GB/T 10092-2009 Statistical analysis of data and interpretation of multiple comparisons of test results

GB/T 14666 Analytical Chemistry Terms

GB/T 15000.3 Working guide for standard samples (2) General principles and statistical methods for setting standard samples

GB 17378.2-2007 Marine Monitoring Code Part 2. Data Processing and Analysis Quality Control

GB/T 19000 Quality Management System Foundation and Terminology

GB/T 22554-2010 Linear calibration based on standard samples

GB/T 27407 Laboratory Quality Control Utilization Statistical Quality Assurance and Control Chart Technical Evaluation Analysis and Measurement System Performance

GB/T 27411-2012 Uncertainty Evaluation Methods and Expressions Used in Testing Laboratories

GB/T 32464-2015 verification of chemical analysis method validation and internal quality control use control chart verification and analysis system

GB/T 32465-2015 verification of chemical analysis methods and internal quality control requirements

GB/T 32467 Chemical Analysis Method Verification Verification and Internal Quality Control Terms and Definitions

GB/T 33464 Guidelines for the preparation and use of standard operating procedures for chemical analysis

JJF1059.1 Evaluation and Expression of Measurement Uncertainty

ISO 11843-1 Detection Capability. Terms and Definitions (Capabilityofdetection-Part 1.Termsanddefinitions)

Retrieval Rate Information Application Conformance Guide for Analytical Measurements [IUPACHarmonisedGuidelinesfortheUseofRecovery

InformationinAnalyticalMeasurement(IUPACTechnical)]

3 Terms and Definitions

The terms and definitions defined in GB/T 6379.1, GB/T 14666, GB/T 19000, GB/T 32467 and ISO 11843-1 apply

In this document.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 54 pages — is available in the English PDF.

Similar standards

How to Download GB/T 35655-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
54 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 35655-2017

$870.00