Valid

GB/T 35449-2017Automatic quantitative loading vehicle system (English PDF)

自动定量装车系统

Preview PDF

This is a limited preview

Buy now to download the full PDF (20 pages)

Need quotation for your management?

Get a formal quotation for GB/T 35449-2017 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 29, 2017

Implementation date

July 1, 2018

Scope

GB/T 35449-2017 is the English-translated version of 自动定量装车系统.

GB/T 35449-2017 is the Chinese standard "Automatic quantitative loading vehicle system".

Its scope clause reads: This standard specifies the automatic quantitative loading system (hereinafter referred to as loading system) terms and definitions, product type, measurement requirements, technical requirements Requirements, test methods, inspection rules and signs, packaging, transportation and storage.

This standard applies to non-blocking bulk materials (such as coal) trains, car loading system. This standard refers to the loading system is a pre-set schedule can be in the vehicle (train/car) to complete the process of bulk material points Off, weighing, loading and accumulation of automatic weighing. Its clauses include terms and definitions, symbols.

Found what you need?

Document preview — GB/T 35449-2017

National Standard of the People's Republic of China

ICS: 17.100
Classification: N 13

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Foreword
1 Scope
2 Normative references
3 Terms and definitions, symbol
3.1 Terms and definitions
3.2 Symbol
4 product models and specifications
4.1 The basic structure type
4.2 Model
4.3 specifications
5 measurement requirements
5.1 Accuracy level
5.2 error range
5.3 sub-value d, cumulative sub-value dt
5.4 Static weighing the maximum allowable error
5.5 Minimum weighing (Min)
5.6 Repeatability
5.7 Impact factor (weighing device)
5.8 electronic weighing requirements
6 technical requirements
6.1 Applicability of the operation
6.2 Operational safety
6.3 Machinery and equipment
6.4 Power System
6.5 Electrical and Control System
6.6 weighing system
6.7 Other
6.8 zero device
6.9 as a function of control weighing instrument
6.10 Manufacture of Machinery
7 Test methods
7.1 Determination of a single charge quality
7.2 The implementation of material testing
7.3 Loading times
7.4 Test Methods of Materials
7.5 The quality of the test charge
7.6 Power System Test
7.7 Electrical and control system test
8.1 type test
8.2 factory inspection
9 logo, packaging, transportation and storage
9.1 mark
9.2 Packaging
9.3 Transportation
9.4 Storage
Appendix A (Normative) Automatic quantitative loading system test method

1 Scope

This standard specifies the automatic quantitative loading system (hereinafter referred to as loading system) terms and definitions, product type, measurement requirements, technical requirements

Requirements, test methods, inspection rules and signs, packaging, transportation and storage.

This standard applies to non-blocking bulk materials (such as coal) trains, car loading system.

This standard refers to the loading system is a pre-set schedule can be in the vehicle (train/car) to complete the process of bulk material points

Off, weighing, loading and accumulation of automatic weighing.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 191 Packaging - Pictorial signs

GB/T 3766 hydraulic drive systems and components of the general rules and safety requirements

GB/T 4167 weight

GB 5226.1 Safety of machinery - Electrical machinery and electronic equipment - Part 1. General specifications

GB/T 7551-2008 load cells

GB/T 7724 electronic weighing instruments

GB/T 7932 pneumatic system of general technical conditions

GB/T 9969 Industrial Products Manual General

GB/T 13384 mechanical and electrical product packaging General technical conditions

GB 14249.1 electronic weighing safety requirements

GB/T 14250 Weighing terminology

GB/T 15395 electronic equipment cabinets general technical conditions

GB/T 23111-2008 non-automatic weighing instrument

GB/T 26389 Scale product model preparation methods

QB/T 1588.1 Light industry machinery welding parts general technical conditions

QB/T 1588.2 Light industry machinery cutting parts General technical conditions

QB/T 1588.3 Light industry machinery assembly general technical conditions

QB/T 1588.4 Light industry machinery painting general technical conditions

3 Terms and definitions, symbols

3.1 Terms and definitions

GB/T 14250 and defined by the following terms and definitions apply to this document.

3.1.1 Loading quality loadingmass

According to the rated loading quality of the car to be installed set single or multiple loading target value, loading system through the automatic control device, the target value […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.

Referenced standards

Cited by

NB/T 11643-2024General technical standard of coal batch weigh wagon loading system

Similar standards

GB/T 48051-2026|GB/T 48052-2026|GB/T 48053-2026|GB/T 33213-2025|GB/T 46398-2025|GB/T 43740-2024

How to Download GB/T 35449-2017

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.