GB/T 35414-2017Requirements of oxygen conditioning for indoor oxygen diffusion in plateau area (English PDF)
高原地区室内空间弥散供氧(氧调)要求
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 35414-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 29, 2017
Implementation date
April 1, 2018
Scope
GB/T 35414-2017 is the English-translated version of 高原地区室内空间弥散供氧(氧调)要求.
GB/T 35414-2017 is the Chinese standard "Requirements of oxygen conditioning for indoor oxygen diffusion in plateau area". Its scope clause reads: This standard specifies the requirements for diffuse oxygen supply in indoor space in plateau areas.
This standard is applicable to the design and effect evaluation of the diffuse oxygen supply system in the space (cabin) of the plateau area, and also for the non-plateau area (cabin).
Refer to the design and evaluation of the space diffusion oxygen supply system. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 35414-2017
National Standard of the People's Republic of China
- ICS
- 13.180
- Classification
- A 25
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 oxygen supply concentration physiological requirements
- 4.1 Oxygen concentration requirements in different altitude ranges
- 4.2 Selection of altitude oxygen supply level
- 5 Maximum oxygen concentration requirement for oxygen supply space
- 6 oxygen supply gas quality requirements
- 7 Installation requirements for plateau oxygen regulators
- 7.1 Oxygen outlet requirements
- 7.2 Airflow noise requirements
- 7.3 Oxygen concentration monitoring requirements
- Appendix A (Normative Appendix) Oxygen Concentration Requirements for Plateau Oxygen Regulations
1 Scope
This standard specifies the requirements for diffuse oxygen supply in indoor space in plateau areas.
This standard is applicable to the design and effect evaluation of the diffuse oxygen supply system in the space (cabin) of the plateau area, and also for the non-plateau area (cabin).
Refer to the design and evaluation of the space diffusion oxygen supply system.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 9068-1988 Heating, ventilation and air conditioning equipment - Determination of sound power level
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Diffuse oxygen supply
Oxygen is supplied to the indoor space in a diffused manner via a pipeline or terminal.
3.2 Plateau oxygen modulation
The method of adjusting and controlling the oxygen concentration in the indoor air of the plateau (cabin) by artificial means.
3.3 Physiologically equivalent height
Using artificial oxygen supply measures, the human alveolar oxygen partial pressure and the physiological effects of the body are equivalent to the altitude.
Note. The calculation of the alveolar oxygen partial pressure is calculated by referring to the method in Appendix A of GJB114-1986.
3.4 Rapidly enter the plateau
People living in low-altitude areas (under 3,000m above sea level) are directly reached by planes, trains, etc. within a few hours and exposed to the high seas.
Pull out (above 3000m above sea level).
3.5
People living in the plateau (above 3000m above sea level), or living in low-altitude areas (above 3000m above sea level)
Living for 3 months or more.
3.6 Short plateau
People living in low-altitude areas (below 3,000 m above sea level) stayed in the plateau for less than 3 months.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 35414-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 35414-2017
$105.00