Valid

GB/T 35366-2017Test methods of maneuverability for manned submersible (English PDF)

载人潜水器实艇操纵性试验方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (20 pages)

Need quotation for your management?

Get a formal quotation for GB/T 35366-2017 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 29, 2017

Implementation date

July 1, 2018

Scope

GB/T 35366-2017 is the English-translated version of 载人潜水器实艇操纵性试验方法.

GB/T 35366-2017 is the Chinese standard "Test methods of maneuverability for manned submersible". Its scope clause reads: This standard specifies the terms and definitions, symbols, general requirements and test content and test content of manned test methods of manned submersible method.

This standard applies to manned submersible at sea maneuvering test, manned submersibles in the pool, the lake on the actual maneuverability test parameters According to the standard implementation.

Manned submersible according to the actual situation to select the appropriate project, submersible without this feature may not do the appropriate test. its He type submersibles in the pool, the lake, the sea on the actual maneuvering test can refer to the implementation of this standard. Its clauses include terms and definitions; symbol.

Found what you need?

Document preview — GB/T 35366-2017

National Standard of the People's Republic of China

ICS
47.020.99
Classification
U 11

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • Introduction
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 symbol
  • 5 General requirements
  • 5.1 Guarantee conditions
  • 5.2 test equipment
  • 5.3 Test conditions
  • 5.4 Emergency Treatment
  • 6 test content and methods
  • 6.1 Test Project
  • 6.2 no-power submarine load response test
  • 6.3 power dive function test
  • 6.4 non-powered floating throwing response test
  • 6.5 power up function test
  • 6.6 automatic deep function test
  • 6.7 Automatic Orientation Function Test
  • 6.8 Three-way speed test
  • 6.9 brake slippage test
  • 6.10 Rotation test
  • 6.11 automatic high function test
  • 6.12 hover function function test
  • Appendix A (Normative) Symbol
  • Appendix B (normative) test results record table
  • References

1 Scope

This standard specifies the terms and definitions, symbols, general requirements and test content and test content of manned test methods of manned submersible method.

This standard applies to manned submersible at sea maneuvering test, manned submersibles in the pool, the lake on the actual maneuverability test parameters

According to the standard implementation. Manned submersible according to the actual situation to select the appropriate project, submersible without this feature may not do the appropriate test. its

He type submersibles in the pool, the lake, the sea on the actual maneuvering test can refer to the implementation of this standard.

2 Normative references

The following documents for the application of this standard is essential. For dated references, only the dated version applies to this article

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

Submarine and underwater equipment - Terminology GB/T 13407-1992

3 Terms and definitions

GB/T 13407-1992 defined and the following terms and definitions apply to this document.

3.1 No power to dive unpoweredsubmergence

Do not rely on thrusters and other power equipment to achieve the dive.

3.2 Unpoweredascend without motivation

Do not rely on thrusters and other power equipment to achieve the float.

3.3 Autodetect autodepth

Keep submersibles automatically at a given depth.

3.4 Autodirection

So that submersible automatically during exercise, to maintain a given heading angle.

3.5 Brake slip brakedistance

Submarine from the beginning of braking to the submarine relative to the "static" selvage distance.

3.6 Automatically high autoheight

Keep submersibles automatically at a given off-base altitude.

4 symbol

The symbols listed in Table A.1 apply to this document.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.

Similar standards

How to Download GB/T 35366-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
20 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 35366-2017

$385.00