GB/T 35266-2017Textiles—Determination of splitting rates of composite microfibers in fabrics (English PDF)
纺织品 织物中复合超细纤维开纤率的测定
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 35266-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 29, 2017
Implementation date
July 1, 2018
Scope
GB/T 35266-2017 is the English-translated version of 纺织品 织物中复合超细纤维开纤率的测定.
GB/T 35266-2017 is the Chinese standard "Textiles—Determination of splitting rates of composite microfibers in fabrics". Its scope clause reads: This standard specifies the test method for determining the open ratio of the peel-type composite microfiber in the fabric.
This standard applies to peel-off composite microfiber fabrics. Other products can be implemented by reference. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 35266-2017
National Standard of the People's Republic of China
- ICS
- 59.080.30
- Classification
- W 04
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Terms and definitions
- 2.1 Microfiber composite filaments
- 2.2 Composite microfibers
- 2.3 Peel-off composite microfiber
- 2.4 Open fiber splitting
- 2.5 Opening rate splittingrates
- 2.6 Displacement fibrillation spinningplitting
- 2.7 Dislocation rate spinningplittingrate
- 2.8 Cleft splitting
- 2.9 Cracking fiber rate cracksplittingrate
1 Scope
This standard specifies the test method for determining the open ratio of the peel-type composite microfiber in the fabric.
This standard applies to peel-off composite microfiber fabrics. Other products can be implemented by reference.
2 Terms and definitions
The following terms and definitions apply to this document.
2.1 Microfiber composite filaments
Chemical fiber filaments obtained by composite spinning of two or more polymers of different chemical or physical properties are physically or chemically
Process, the polymer components can be separated from each other to form a microfiber.
2.2 Composite microfibers
Microfiber composite filament fabrics treated by open fiber, the resulting single-fiber density of less than 0.33dtex microfiber.
2.3 Peel-off composite microfiber
The components co-exist and separated from each other composite microfiber.
2.4 Open fiber splitting
So that the fabric in the peel-off microfiber composite filament components separate from each other to form a microfiber physical or chemical treatment process.
2.5 Opening rate splittingrates
After the open fiber treatment, the actual open fiber number of single fiber separation (root) accounted for the theoretical number of composite microfiber single fiber (ie, peel-off composite super
The fraction of wedge-shaped components in the fine fibers, the sum of the number of split open fibers and the number of single fibers that have not been opened).
2.6 Displacement fibrillation spinningplitting
The components of the peel-type composite microfiber are completely separated and the single fibers of the components are displaced from each other.
2.7 Dislocation rate spinningplittingrate
The number of single-fiber displaced (number of fibers) in theory accounted for the number of composite microfiber fibers (root number) percentage.
2.8 Cleft splitting
Peel-type composite microfiber fibers between the obvious cracks, and partially separated from each other's condition.
2.9 Cracking fiber rate cracksplittingrate
The number of split single fibers (root number) in theory, the number of composite microfiber single fiber (root number) percentage.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 35266-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 35266-2017
$235.00