Valid

GB/T 35263-2017Textiles—Testing and evaluation for cool feeling in contact instant (English PDF)

纺织品 接触瞬间凉感性能的检测和评价

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 35263-2017 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 29, 2017

Implementation date

July 1, 2018

Scope

GB/T 35263-2017 is the English-translated version of 纺织品 接触瞬间凉感性能的检测和评价.

GB/T 35263-2017 is the Chinese standard "Textiles -- Testing and evaluation for cool feeling in contact instant". Its scope clause reads: This standard specifies the testing and evaluation methods for the instant cooling performance of textiles in contact with the skin.

This standard applies to all kinds of fabrics and their products. Its clauses include terms and definitions; principle; test equipment; standard atmosphere for humidity conditioning and test; preparation of specimen; test procedure; result calculation; assessment; test report.

It was issued by the General Administration of Quality Supervision, Inspection and Quarantine on DECEMBER 29, 2017 and took effect on JULY 01, 2018.

Found what you need?

Document preview — GB/T 35263-2017

National Standard of the People's Republic of China

ICS
59.080.01
Classification
W 04

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword3
  • 1 Scope4
  • 2 Normative references4
  • 3 Terms and definitions4
  • 4 Principle5
  • 5 Test equipment5
  • 6 Standard atmosphere for humidity conditioning and test6
  • 7 Preparation of specimen7
  • 8 Test procedure7
  • 9 Result calculation7
  • 10 Assessment7
  • 11 Test report8

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

1 Scope

This standard specifies the testing and evaluation methods for the instant cooling performance of textiles in contact with the skin.

This standard applies to all kinds of fabrics and their products.

2 Normative references

The following documents are essential to the application of this document. For the dated documents, only the versions with the dates indicated are applicable to this document; for the undated documents, only the latest version (including all the amendments) is applicable to this standard.

GB/T 6529 Textiles - Standard atmospheres for conditioning and testing

GB/T 8170 Rules of rounding off for numerical values & expression and judgement of limiting values

3 Terms and definitions

The following terms and definitions apply to this document.

3.1 Contact transient cool feeling

When the skin is in contact with fabrics below its temperature for an instant, causing rapid loss of heat on the surface of the skin and an instantaneous drop in temperature, forming a cool feeling by reflecting the temperature-sensitive nerve endings in the skin to the brain.

4 Principle

Under the specified test environmental conditions, contact the thermal detection plate with a temperature higher than the specimen with the specimen; measure the temperature change of the thermal detection plate with time; calculate its contact cooling coefficient (qmax), which can characterize the performance of contact transient cool feeling of the sample. The larger the qmax value, the stronger the skin feels the cooling; the smaller the value, the weaker the skin feels the cooling.

5 Test equipment

Cool feeling performance tester (see Figure 1), including thermal detection plate, sample loading platform, automatic calculation and recording device. The specific requirements are as follows.

6 Standard atmosphere for humidity conditioning and test Perform the humidity conditioning and test for the specimen in the standard atmosphere as specified by GB/T 6529. Sample loading platform Copper plate Temperature sensor Insulating material Specimen

7 Preparation of specimen

Cut 5 representative specimens. The size of each specimen is about 200 mm × 200 mm. Sampling shall avoid defects and wrinkles that affect the test results.

8 Test procedure

8.1 Set the temperature of the sample loading platform to (20 ± 0.5) °C. Spread the specimen flat on the sample loading platform, with the fabric surface in contact with the skin facing up.

8.3 After the temperature of the thermal detection plate reaches the temperature set in 8.2 and remains stable, cut off the heat source of the thermal detection plate and quickly place it vertically on the specimen, so that the surface of the copper plate is in contact with the fabric.

8.4 Determine all other specimens according to the steps 8.1 ~ 8.3.

9 Result calculation

Calculate the average value of qmax of 5 specimens. The result shall be rounded to two decimal places according to GB/T 8170.

10 Assessment

If necessary, evaluate the instant cool feeling of the sample. When delta T = 15 °C, the evaluation index is as shown in Table 1.

11 Test report

The test report shall include the following. […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download GB/T 35263-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 35263-2017

$90.00