GB/T 35180-2017Technical specifications for rubber bushing used for torque rod of air suspension for commercial vehicle (English PDF)

1 Scope

This standard specifies the technical requirements and test methods for commercial vehicle air suspension thrust rod rubber hinge joints.

This standard applies to commercial vehicle air suspension thrust rod rubber hinge joints, automobile with other rubber joints can refer to the implementation of this standard.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 228.1 tensile testing of metallic materials - Part 1. room temperature test method

Rubber, vulcanized or thermoplastic - Determination of tensile stress - strain properties

GB/T 529 Determination of tear strength of vulcanized rubber or thermoplastic rubber (pant-shaped, rectangular and crescent-shaped specimen)

GB/T 531.1 vulcanized rubber or thermoplastic rubber test methods into the hardness - Part 1. Shore Hardness Tester (Shore Hardness)

GB/T 699 high-quality carbon structural steel

GB/T 1804 General tolerances Tolerances for linear and angular dimensions without tolerances

GB/T 3077 alloy structural steel

GB/T 3512 vulcanized rubber or thermoplastic rubber hot air accelerated aging and heat test

GB/T 3672.1 rubber products tolerances Part 1. Dimensional tolerances

GB/T 3672.2 rubber products tolerances Part 2. Geometrical tolerances

GB/T 4336 Determination of multi-element content of carbon steel and low alloy steel Spark discharge atomic emission spectrometry (conventional method)

GB/T 6038 rubber test compounding ingredients, mixing and curing equipment and operating procedures

GB/T 6394 metal average grain size determination method

GB/T 7759.1 vulcanized rubber or thermoplastic rubber - Determination of compression set - Part 1. At room temperature and high temperature conditions

GB/T 7762 Vulcanized rubber or thermoplastic rubber resistance to ozone cracking static tensile test

GB/T 10125 artificial atmosphere corrosion test salt spray test

GB/T 11211 vulcanized rubber or thermoplastic rubber and metal bonding strength of the second board method

Tolerances and machining allowances for steel forgings GB/T 12362-2003

GB/T 15256 vulcanized rubber or thermoplastic rubber low temperature brittleness (multi-sample method)

GB/T 15822.1 Non-destructive testing magnetic particle testing Part 1. General

GB/T 17107 forgings structural steel grades and mechanical properties

GB/T 34591 commercial vehicle air suspension terminology

HG/T 3090 Molded and extruded rubber products, the appearance of the general provisions of quality

3 Terms and definitions

GB/T 34591 and defined by the following terms and definitions apply to this document.