Valid

GB/T 35172-2017Determination of corrosion resistance of refractories for cement kilns to CMSW (English PDF)

水泥窑用耐火材料抗生活垃圾预处理可燃物侵蚀性试验方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 35172-2017 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 29, 2017

Implementation date

November 1, 2018

Scope

GB/T 35172-2017 is the English-translated version of 水泥窑用耐火材料抗生活垃圾预处理可燃物侵蚀性试验方法.

GB/T 35172-2017 is the Chinese standard "Determination of corrosion resistance of refractories for cement kilns to CMSW".

Its scope clause reads: This standard specifies the refractory cement kiln anti-domestic waste pretreatment combustibles aggressiveness test method principle, equipment, samples Preparation, test procedure, result determination and data processing and test report.

This standard applies to refractories used in cement kilns anti-domestic waste pretreatment of combustibles Determination of aggressiveness. Its clauses include terms and definitions; principle; equipment.

Found what you need?

Document preview — GB/T 35172-2017

National Standard of the People's Republic of China

ICS
81.080
Classification
Q 40

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 principle
  • 5 equipment

1 Scope

This standard specifies the refractory cement kiln anti-domestic waste pretreatment combustibles aggressiveness test method principle, equipment, samples

Preparation, test procedure, result determination and data processing and test report.

This standard applies to refractories used in cement kilns anti-domestic waste pretreatment of combustibles Determination of aggressiveness.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 7321 shaped refractory products sample preparation method

GB/T 8170 rounded repair rules and limit values of the representation and judgment

GB/T 10325 Shaped refractory products acceptance inspection sampling rules

GB/T 17617 refractory raw materials and amorphous refractory samples

GB/T 18930 refractories terminology

GB/T 35170 cement kiln co-disposal of domestic waste pre-treatment of combustibles

GB/T 35171 cement kiln co-processing of domestic waste pretreatment combustibles sampling and sample preparation methods

YB/T 5202 dense refractory castable consistency and sample preparation methods

3 Terms and definitions

GB/T 18930 defined terms and definitions apply to this document.

4 principle

A certain amount of household waste pre-treatment combustible material (CMSW) into the refractory samples, released at high temperature CMSW combustion

Effluent (chloride, sulfide, etc.) and other corrosive substances react with the refractory matrix chemical reaction, the formation of anti-refractory material

Metamorphic layer, by measuring the thickness of the metamorphic layer to determine its ability to resist erosion.

5 equipment

5.1 electric oven

Can control the temperature at 110 °C ± 5 °C.

5.2 electric heating furnace

Can be heated to 1100 °C above, the maximum temperature difference in the furnace should be <= 10 °C, loading temperature fluctuations during incubation should be <= 10 °C.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 35172-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 35172-2017

$85.00