Valid

GB/T 35129-2017RFID system used in food manufacturing—Environmental suitability requirements (English PDF)

面向食品制造业的射频识别系统 环境适应性要求

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 35129-2017 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 29, 2017

Implementation date

July 1, 2018

Scope

GB/T 35129-2017 is the English-translated version of 面向食品制造业的射频识别系统 环境适应性要求.

GB/T 35129-2017 is the Chinese standard "RFID system used in food manufacturing—Environmental suitability requirements". Its scope clause reads: This standard specifies the various types of environmental conditions and their range that radio frequency tags and readers can withstand when used in the food manufacturing industry.

This standard can be used as a sample selection and deployment of RF tags and readers important reference. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 35129-2017

National Standard of the People's Republic of China

ICS
35.240.50
Classification
L 07

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Preface
  • Introduction
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 General
  • 5 food manufacturing environmental conditions and parameter range
  • 5.1 climatic conditions
  • 5.2 biological conditions
  • 5.3 Chemical Conditions
  • 5.4 Mechanical conditions
  • 5.5 Electromagnetic conditions
  • 5.6 power conditions
  • 6 environmental adaptability test
  • 6.1 General requirements
  • 6.2 Test conditions
  • 6.3 Test Procedures
  • 7 environmental adaptability requirements
  • 7.1 General requirements
  • 7.2 special requirements
  • References

1 Scope

This standard specifies the various types of environmental conditions and their range that radio frequency tags and readers can withstand when used in the food manufacturing industry.

This standard can be used as a sample selection and deployment of RF tags and readers important reference.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 2421.1 Electrical and Electronic Products Environmental Testing Overview and Guidelines

GB/T 2422 Environmental test methods for the preparation of guideline terms and definitions

GB/T 2423.1 Environmental testing for electric and electronic products Part 2. Test methods Test A. Low temperature

GB/T 2423.2 Environmental testing for electric and electronic products Part 2. Test methods Test B. High temperature

GB/T 2423.3 Environmental testing Part 2. Test methods Test Cab. Constant hot and humid test

GB/T 2423.5 Environmental testing for electric and electronic products Part 2. Test methods Test Ea and Guidelines Impact

GB/T 2423.6 Environmental testing for electric and electronic products Part 2. Test methods Test Eb and guidelines Collision

GB/T 2423.8 Environmental testing for electric and electronic products Part 2. Test methods Test Ed. Free fall

GB/T 2423.10 Environmental testing for electric and electronic products Part 2. Test methods Test Fc. Vibration (sinusoidal)

GB 4943.1 Information technology equipment safety Part 1. General requirements

GB/T 17618 Information Technology Equipment Immunity Limits and Methods of Measurement

13.56 MHz Radio Frequency Identification Read/Write Device Specification

SJ/T 11363 Electronic information products in the limited requirements of toxic and hazardous substances

SJ/T 11364 Hazardous Substances in Electrical and Electronic Products Restriction of Labeling Requirements

SJ/T 11365 electronic information products in the detection of toxic and hazardous substances

3 Terms and definitions

The following terms and definitions apply to this document.

3.1 Radio frequency identification

In the RF part of the spectrum, using electromagnetic coupling or inductive coupling, through a variety of modulation and coding schemes, interoperability with radio frequency tags

A technology for reading tag identity.

[GB/T 29261.3-2012, Definition 05.01.01]

3.2 RF tag

Electronic label

Used for object or object identification, with information storage function, can receive electromagnetic field modulation signal of reader, and return the number of response signals […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 35129-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 35129-2017

$145.00