GB/T 35066-2018Teetered bed separator (English PDF)
干扰床分选机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 35066-2018 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
May 14, 2018
Implementation date
September 1, 2018
Scope
GB/T 35066-2018 is the English-translated version of 干扰床分选机.
GB/T 35066-2018 is the Chinese national product standard for teetered bed separators, also called interference bed sorters, used in coal preparation. It sets out the type designation and basic parameters of the separator, its technical requirements, test methods and inspection rules, and how it is marked, packaged, transported and stored.
The model designation follows MT/T 154.7, the method for naming coal preparation equipment. The normative references cover structural steels, general tolerances, noise measurement by sound pressure, weld defect grading, low-voltage distribution design and the welded parts, painting and castings of heavy machinery.
Makers of coal preparation equipment and the plants that buy it use it to specify and accept the machine. It was issued on 14 May 2018 and has applied since 1 September 2018.
Found what you need?
Document preview — GB/T 35066-2018
National Standard of the People's Republic of China
- ICS
- 73.120
- Classification
- D 95
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 type and basic parameters
- 4 Technical requirements
- 5 Test method
- 6 Inspection rules
- 7 Marking, packaging, transportation and storage
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
1 Scope
This standard specifies the type of interference bed sorting machine (hereinafter referred to as "separator"), basic parameters, technical requirements, test methods, inspection rules, Marking, packaging, transportation and storage.
This standard applies to interference bed sorters.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 191 packaging storage and transportation icon
GB/T 699 high quality carbon structural steel
GB/T 700 carbon structural steel
GB/T 1184 Shape and position tolerances without tolerance values
GB/T 1804 General tolerances tolerances for linear and angular dimensions of tolerances
GB/T 3768 Acoustic sound pressure method for the determination of noise source sound power level
GB/T 9969 General guidelines for the use of industrial products
GB/T 13306 signage
GB/T 14689 technical drawing sheet format and format
GB/T 19418 steel arc welding joint defect quality grading guide
GB 50054 Low Voltage Distribution Design Specification
MT/T 154.7 coal sorting equipment model preparation method
JB/T 5000.3 General technical requirements for heavy machinery - Part 3. Welding parts
JB/T 5000.12 General technical conditions for heavy machinery - Part 12. Painting
JB/T 6402 large low alloy steel castings
3 Type and basic parameters
3.1 Model representation method
The model representation method shall comply with the provisions of MT/T 154.7.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 699Quality carbon structure steels
- GB/T 700Carbon structural steels
- GB/T 1184Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
- GB/T 1804General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
- GB/T 3768Acoustics -- Determination of sound power levels and sound energy levels of noise sources using sound pressure -- Survey method using an enveloping measurement surface over a reflecting plane
Similar standards
How to Download GB/T 35066-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 50054-2011 — Code for design of low voltage electrical installations
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
GB/T 13306-2011 — Plates
Secure payment via Stripe
Payments accepted
GB/T 35066-2018
$145.00