Valid

GB/T 34938-2017General technical requirements for planar electromagnetic shielding materials (English PDF)

平面型电磁屏蔽材料通用技术要求

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 34938-2017 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

November 1, 2017

Implementation date

May 1, 2018

Scope

GB/T 34938-2017 is the English-translated version of 平面型电磁屏蔽材料通用技术要求.

GB/T 34938-2017 is the Chinese standard "General technical requirements for planar electromagnetic shielding materials".

Its scope clause reads: This standard specifies the terms and settings of the plane electromagnetic shielding material (hereinafter referred to as shielding material) frequency range 0Hz ~ 300GHz Meaning, classification, requirements, test methods, marking, packaging, transportation and storage.

This standard applies to planar electromagnetic shielding materials. Its clauses include terms and definitions; categories; requirements.

Found what you need?

Document preview — GB/T 34938-2017

National Standard of the People's Republic of China

ICS
33.100
Classification
K 04

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Categories
  • 5 Requirements
  • 5.1 appearance requirements
  • 5.2 Technical Requirements
  • 5.2.1 Industrial electromagnetic shielding fabric
  • 5.2.2 conductive pad
  • 5.2.3 Electromagnetic shielding rubber
  • 5.2.4 Electromagnetic shielding plastic
  • 5.2.5 Electromagnetic shielding transparent plate
  • 5.2.6 cut off the waveguide ventilation board
  • 5.2.7 Electromagnetic shielding film
  • 5.2.8 Electromagnetic shielding metal plate (net)
  • 5.2.9 Planar Intrinsic Conductive Polymer Material
  • 5.2.10 Absorption plate
  • 6 test method
  • 6.1 Industrial electromagnetic shielding fabric
  • 6.1.1 Shielding effectiveness test
  • 6.1.2 Surface resistance test
  • 6.1.3 metal layer bonding test
  • 6.1.4 breaking strength test
  • 6.2 conductive pads
  • 6.2.1 Shielding effectiveness test
  • 6.2.2 Contact Resistivity Test
  • 6.2.3 Residual deformation test
  • 6.3 electromagnetic shielding rubber
  • 6.3.1 Shielding effectiveness test
  • 6.3.2 Shore hardness test
  • 6.3.3 Tensile strength test
  • 6.4 Electromagnetic shielding plastic
  • 6.5 Electromagnetic shielding transparent plate
  • 6.5.1 Shielding effectiveness test
  • 6.5.2 Visible light transmittance test
  • 6.5.3 visible light reflectance test
  • 6.6 Cut off the waveguide ventilation plate
  • 6.7 Electromagnetic shielding film
  • 6.7.1 Shielding effectiveness test
  • 6.7.2 Heat Shrinkage Test
  • 6.7.3 Light transmittance test
  • 6.7.4 peel strength test
  • 6.8 Electromagnetic shielding metal plate (net)
  • 6.9 Planar Intrinsically Conductive Polymer Material
  • 6.10 absorbers
  • 7 logo, packaging, transportation, storage
  • 7.1 mark
  • 7.2 Packaging
  • 7.3 Transportation
  • 7.4 Storage
  • Appendix A (Normative) Conductive gasket residual deformation test method

1 Scope

This standard specifies the terms and settings of the plane electromagnetic shielding material (hereinafter referred to as shielding material) frequency range 0Hz ~ 300GHz

Meaning, classification, requirements, test methods, marking, packaging, transportation and storage.

This standard applies to planar electromagnetic shielding materials.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 191 Packaging - Pictorial signs

Rubber, vulcanized or thermoplastic - Determination of tensile stress - strain properties GB/T GB/T 531.1-2008 vulcanized rubber or thermoplastic rubber test methods into the hardness - Part 1. Shore Hardness Tester (Shao

Hardness

Transparent plastics - Determination of light transmittance and haze GB/T 2410-2008

Standard Test Method for Peel Strength of Adhesive Tapes GB/T 2792-2014

Test methods for automotive safety glass - Part 2. Optical properties test

Films for electrical insulation - Part 2. Test methods

Electromagnetic shielding materials terminology GB/T 26667-2011

General technical requirements for electromagnetic shielding fabrics for industry GB/T 30139-2013

Measurement method of shielding effectiveness of planar electromagnetic shielding materials GB/T 30142-2013

GJB2038A-2011 Radar Absorbing Material Reflectance Test Method

ASTMB117 salt spray injector operating procedures [StandardPracticeforOperatingSaltSpray (Fog) Apparatus]

MIL-STD-202G Electronic and Electrical Component Test Methods (TestMethodStandardElectronicandElectrical

ComponentParts)

3 Terms and definitions

GB/T 26667-2011 defined terms and definitions apply to this document.

4 categories

Shielding materials in accordance with the structure and use is divided into industrial electromagnetic shielding fabrics, conductive pads, electromagnetic shielding rubber, electromagnetic shielding plastic, electromagnetic

Shielding Transparent Sheet, Cutoff Ventilation Plate, Electromagnetic Shielding Film, Electromagnetic Shielding Metal Sheet (Net), Flat Intrinsically Conductive Polymer Material, Suction

Wave plate.

5 requirements

5.1 appearance requirements

Product appearance surface should be smooth, uniform color distribution, no bubbles, cracks, holes, deformation, corrosion, obvious impurities, processing damage […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 34938-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 34938-2017

$205.00